NordicTrack NTL18907.0 HOW to Fold and Move the Treadmill, HOW to Fold the Treadmill for Storage

Page 24

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL FOR STORAGE

Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be per- manently damaged. Remove the key and unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill.

1. Hold the frame with your hands in the location shown by the arrow at the right. CAUTION: To decrease the possi- bility of injury, bend your legs and keep your back straight. As you raise the frame, make sure to lift with your legs rather than your back. Raise the frame about

halfway to the vertical position.

2.Move your right hand to the position shown and hold the treadmill firmly. Pull the latch knob to the left and hold it. Raise the frame until the plate passes the pin on the latch knob. Release the latch knob. Make sure that the plate is resting against the pin as shown.

To protect the floor or carpet from damage, place a mat under the treadmill. Keep the treadmill out of direct sunlight. Do not leave the treadmill in the stor- age position in temperatures above 85° Fahrenheit.

Knob

Plate

HOW TO MOVE THE TREADMILL

Before moving the treadmill, convert the treadmill to the stor- age position as described above. Make sure that the plate is securely held by the pin on the lock knob.

1.Hold the handrails and place one foot against a wheel.

2.Tilt the treadmill back until it rolls freely on the wheels. Carefully move the treadmill to the desired location. Never move the treadmill without tipping it back. To reduce the risk of injury, use extreme caution while moving the treadmill. Do not attempt to move the treadmill over an uneven surface.

3.Place one foot against a wheel, and carefully lower the treadmill until it is resting in the storage position.

Wheels

Base

24

Image 24
Contents QUESTIONS? Model No. NTL18907.0 Serial NoCall TOLL-FREE Table of Contents Important Precautions Page Before YOU Begin Assembly Bly. Make sure to connect the connectors Try again. if the Connectors are notHandrail Bolts before tightening them Page 105 Wire Cylinder Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to Personalize Console SettingsSelect the user mode Enter user informationSelect the settings mode HOW to USE the Manual Mode Measure your heart rate if desired Turn on the fan if desiredHOW to USE a Cardio Program Select a Cardio programPress the Start button to start the program See on HOW to USE a Pulse Program Adjust the maximum target heart rate setting if DesiredSelect a Pulse program Turn on the fan if desired HOW to Create a Record Program Select a Record programHOW to USE a Record Program HOW to USE AN Ifit Card Insert an iFIT Card and select a programPage HOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useTop Problem The walking belt slows when walked on Conditioning Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencySuggested Stretches R1206A Qty DescriptionOrdering Replacement Parts Exploded Drawing A-Model No. NTL18907.0 Exploded Drawing B-Model No. NTL18907.0 Exploded Drawing C-Model No. NTL18907.0 Exploded Drawing D-Model No. NTL18907.0 Limited Warranty