HOW TO USE A DISTANCE PROGRAM
1 Insert the key into the console.
See HOW TO TURN ON THE POWER on page 15.
2 Personalize console settings if desired.
See HOW TO PERSONALIZE CONSOLE SET- TINGS on page 15.
3 Select a Distance program.
To select a Distance program, press the Calorie button repeatedly until you reach the Distance pro- grams.
When a Distance program is selected, the display will show the name of the program and the dis- tance goal. Distance Program 1 helps you train for a
4 Press the start button and adjust the speed.
See step 4 on page 17.
5 Change the incline of the treadmill as desired.
See step 5 on page 17.
Select a display mode and follow your
6 progress with the display.
The Distance program will function in the same way as the manual mode, except that while you exercise, the display will show the distance still to be walked or run.
The program will end when you reach your dis- tance goal. The walking belt will then slow to a stop. To stop the program at any time, press the Stop button. To restart the program, press the Start button.
7 Measure your heart rate if desired.
See step 7 on page 18.
8 Turn on the fans if desired.
See step 8 on page 18.
When you are finished exercising, remove the
9 key from the console.
See step 8 on page 20.
HOW TO CREATE A RECORD PROGRAM
1 Insert the key into the console.
See HOW TO TURN ON THE POWER on page 15.
2 Personalize console settings if desired.
See HOW TO PERSONALIZE CONSOLE SET- TINGS on page 15.
3 Select a Record program.
To select a Record program, press the Record button once or twice.
If the Record program has not yet been de- fined, the display will show a program time of three minutes. If the program time is more than three minutes, see HOW TO USE A RECORD PROGRAM on page 22.
Each Record program is divided into
4 Press the Start button to start the program.
A moment after the button is pressed, the walking belt will begin to move. Hold the handrails and begin walking.
21