13.IMPORTANT: See page 14 and plug in the power cord. Next, see page 16 and turn on the power.
Then, press the Incline increase button once.
When the frame stops moving, remove the key from the console and unplug the power cord.
| 15 |
|
| IMPORTANT: |
|
|
|
|
| ||
|
|
|
| Make sure to follow all |
|
|
|
|
| instructions in this step. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
14.Raise the Frame (55) to the position shown.
Have a second person hold the Frame until this step is completed.
Orient the Storage Latch (51) so that the large barrel and the latch knob are oriented as shown. Remove the tie from the upper end of the Storage Latch (51). Attach the upper end of the Storage Latch to the Frame (55) with a 3/8" x 1 3/4" Patch Bolt (6).
Remove the tie from the lower end of the Storage Latch (51). Keep the holes in the latch cap aligned with the holes in the Storage Latch.
Make sure to keep the latch cap inside the Storage Latch. Attach the Storage Latch to the Base (94) with a 3/8" x 2" Bolt (3) and a 3/8" Nut (10). Note: It may be necessary to move the Frame (55) back and forth to align the Storage Latch with the Base.
Lower the Frame (55) (see HOW TO LOWER THE TREADMILL FOR USE on page 24).
13 |
|
55 | 6 |
| |
Latch Knob |
|
51 |
|
Large |
|
Barrel |
|
| 3 |
94 | 10 |
| Latch |
| Cap |
15.Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. Note: Extra hardware may be included. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see pages 26 and 27).
13