NordicTrack A2750 PRO warranty Assembly

Page 6

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the top of the walking belt or the shipping carton. This is normal and does not affect treadmill performance. If there is lubri- cant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex keys and your own Phillips screwdriver, adjustable

wrench , needlenose pliers , and scissors .

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses is the quantity needed for assembly. Note: Some small parts may have been preassembled. To avoid dam- aging parts, do not use power tools for assembly. Extra hardware may be included.

1/4" Star

5/16" Star

3/8" Star

 

3/8" Nut (10)–1

Washer (12)–2

Washer (9)–8

 

 

 

Washer (11)–4

 

 

#8 x 1/2"

#8 x 1" Tek Screw

1/4" x 1/2"

 

5/16" x 3/4"

Screw (1)–12

(2)–4

Patch Bolt (8)–6

Patch Bolt (5)–4

5/16" x 1 1/2"

3/8" x 1 3/4" Patch Bolt (6)–1

 

3/8" x 2" Bolt (3)–1

Patch Bolt (4)–6

 

 

3/8" x 5 1/2" Patch Bolt (7)–4

 

 

Bolt Spacer (88)–4

 

Wheel Axle (97)–2

 

 

6

 

 

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Model No. NTL01009.4 Serial No QUESTIONS?1CALL-800TOLL-TO-FREE-BE-FIT On the WEBTable of Contents Important Precautions Save These InstructionsBefore YOU Begin Assembly Attach the other Wheel 95 in the same way Page Patch Bolts yet Assembly Again. if YOU do not Connect the CON Into the Uprights. Do not tighten the Patch Bolts yetAll sixteen Patch Bolts 4, 5, 8. Slide Raise the Frame 55 to the position shown Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Console DiagramFeatures of the Console AudioHOW to Turn on the Power HOW to USE the Manual ModeInsert the key into the console Measure your heart rate if desired. Before using Turn on the fan if desiredHOW to USE a Preset Workout Select a preset workoutStart the workout See on HOW to USE a Competition Workout Select a competition workoutSee on HOW to USE the Ifit Live Mode HOW to USE the Stereo Sound SystemInformation Mode MetricHOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill HOW to Lower the Treadmill for USETroubleshooting Problem The power turns off during useOutlets Problem The walking belt slows when walked on TopView Problem Solution Turn if the walking belt has shifted toConsole display has lines running through it Workout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencySuggested Stretches Part List Key No. Qty DescriptionQty Exploded Drawing a Exploded Drawing B Exploded Drawing C Exploded Drawing D Ordering Replacement Parts Limited WarrantyIcon Health & Fitness, Inc., 1500 S W., Logan, UT
Top Page Image Contents