NordicTrack A2750 PRO warranty HOW to Fold and Move the Treadmill, HOW to Fold the Treadmill

Page 24

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL

To avoid damaging the treadmill, adjust the incline to the lowest position before you fold the treadmill. Then, remove the key and unplug the power cord.

CAUTION: You must be able to safely lift 45 lbs. (20 kg) to raise, lower, or move the treadmill.

1. Hold the metal frame firmly in the location shown

by the arrow below. CAUTION: Do not hold the

HOW TO MOVE THE TREADMILL

Before moving the treadmill, fold it as described at the left. CAUTION: Make sure that the latch knob is locked in the storage position. Moving the tread- mill may require two people.

1.Hold the frame and one of the handrails, and place one foot against a wheel.

frame by the plastic foot rails. Bend your legs

and keep your back straight.

1

1

Frame

Frame

2.Raise the frame until the latch knob locks in the storage position. CAUTION: Make sure that the latch knob locks.

2 Frame

Latch

Knob

To protect the floor or carpet, place a mat under the treadmill. Keep the treadmill out of direct sunlight. Do not leave the treadmill in the storage position in temperatures above 85° F (30° C).

Handrail

Wheel

2.Pull back on the handrail until the treadmill will roll on the wheels, and carefully move it to the desired location. CAUTION: Do not move the treadmill without tipping it back, do not pull on the frame, and do not move the treadmill over an uneven surface.

3.Place one foot against a wheel, and carefully lower the treadmill.

HOW TO LOWER THE TREADMILL FOR USE

1.See drawing 2. Hold the upper end of the treadmill frame with your left hand. Pull the latch knob to the right; if necessary, push the frame forward slightly. Pivot the frame downward a few inches, and re- lease the latch knob.

2.See drawing 1 at the left. Hold the metal frame firmly with both hands, and lower it to the floor.

CAUTION: Do not hold the frame by the plastic foot rails, and do not drop the frame. Bend your legs and keep your back straight.

24

Image 24
Contents QUESTIONS? 1CALL-800TOLL-TO-FREE-BE-FITModel No. NTL01009.4 Serial No On the WEBTable of Contents Important Precautions Save These InstructionsBefore YOU Begin Assembly Attach the other Wheel 95 in the same way Page Patch Bolts yet Assembly Again. if YOU do not Connect the CON Into the Uprights. Do not tighten the Patch Bolts yetAll sixteen Patch Bolts 4, 5, 8. Slide Raise the Frame 55 to the position shown Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Diagram Features of the ConsoleConsole AudioHOW to Turn on the Power HOW to USE the Manual ModeInsert the key into the console Measure your heart rate if desired. Before using Turn on the fan if desiredHOW to USE a Preset Workout Select a preset workoutStart the workout See on HOW to USE a Competition Workout Select a competition workoutSee on HOW to USE the Ifit Live Mode HOW to USE the Stereo Sound SystemInformation Mode MetricHOW to Fold and Move the Treadmill HOW to Fold the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USETroubleshooting Problem The power turns off during useOutlets Problem The walking belt slows when walked on TopView Problem Solution Turn if the walking belt has shifted toConsole display has lines running through it Exercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencySuggested Stretches Part List Key No. Qty DescriptionQty Exploded Drawing a Exploded Drawing B Exploded Drawing C Exploded Drawing D Ordering Replacement Parts Limited WarrantyIcon Health & Fitness, Inc., 1500 S W., Logan, UT