Horizon Fitness WT950 manual Place ARC Washer D and Bolt

A S S E M B LY STEP 2

INTRODUCTION

HARDWARE BAG 2 CONTENTS :

	���������������
	������
��������
�����
������	��������������
��������	������
	����������

����

���������� �������������

��������

���������������������������

������������������������

* Be sure to tighten bolts after all are lined up.

ASSEMBLED IN STEP 2-D

A Open HARDWARE BAG 2.

BWith running deck in lowered position, place CONSOLE on upright masts. Slide the brackets that are underneath the console into the top holes of the upright masts.

CPlace LOCK WASHER (C) and BOLT (B) into flat side of LEFT upright MAST and lightly tighten.

DPlace ARC WASHER (D) and BOLT

(B) into curved side of LEFT upright MAST and lightly tighten.

EGently lift RIGHT side of the console to connect the CONSOLE CABLE. Carefully tuck wires in mast to avoid damage. NOTE: Do not pinch console cable or grip pulse wires.

FRepeat steps C-D above to assemble the right side upright mast and console.

GTighten all bolts completely.

IMPORTANT PRECAUTIONS

ASSEMBLY

BEFORE YOU BEGIN

TREADMILL OPERATION

TROUBLESHOOTING CONDITIONING & MAINTENANCE GUIDELINES

9

LIMITED WARRANTY