THE INFORMATION MODE/DEMO MODE
The console features an information mode that keeps track of the total number of hours that the treadmill has been operated and the total number of miles that the walking belt has moved. The information mode also al- lows you to switch the console from miles per hour to kilometers per hour. In addition, the information mode allows you to turn on and turn off the demo mode.
To select the information mode, hold down the Stop button while inserting the key into the console. When the information mode is selected, the following informa- tion will be shown:
The Time/Segment Time/ Pace display will show the total number of hours the treadmill has been used.
The Distance/Incline/Laps display will show the total number of miles (or kilome- ters) that the walking belt has moved.
An “E” for english miles or an “M” for metric kilometers will appear in the Speed dis- play. Press the Speed ▲ but- ton to change the unit of measurement.
THE OPTIONAL CHEST PULSE SENSOR
An optional chest pulse sensor adds even more features to the console. The chest pulse sensor provides
HOW TO ADJUST THE FIRMNESS OF THE CUSHIONING SYSTEM
The treadmill features a cushioning system that reduces the impact as you walk or run on the treadmill. The firmness of the cushioning system is controlled with the adjustable isolators on each side of the treadmill. To increase the firmness, slide the isolators towards the back of the treadmill. Make sure that both isolators are in the same position. Note: The faster you run on the treadmill, or the heavier your weight, the firmer the cushioning system should be.
IMPORTANT: The Pulse/ Calories/Fat Calories dis- play should be blank. If a “d” appears in the display,
the console is in the “demo” mode. This mode is intended
to be used only when a treadmill is displayed in a store. When the console is in the demo mode, the power cord can be plugged in, the key can be removed from the console, and the displays and indicators on the console will automatically light in a preset sequence; the but- tons on the console will not operate. If a “d” appears in the Pulse/Calories/Fat Calories display when the in- formation mode is selected, press the Speed ▼ but- ton so the display is blank.
Adjustable Isolator |
To exit the information mode, remove the key from the console.
20