Reebok Fitness RBTL12921 Problem The displays of the console do not function properly, Top View

Page 24

PROBLEM: The walking belt is off-center or slips when walked on

SOLUTION: a. If the walking belt is off-center, first remove the key and UNPLUG THE POWER CORD. If the walking belt has shifted to the left, use the allen wrench to turn the left rear roller bolt clockwise 1/2 of a turn; if the walking belt has shifted to the right, turn the left bolt counterclock- wise 1/2 of a turn. Be careful not to overtighten the walk- ing belt. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is centered.

b. If the walking belt slips when walked on, first remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller bolts clockwise 1/4 of a turn. When the walking belt is correctly tightened, you should be able to lift each side of the walking belt 3 to 4 inches off the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, insert the key, and walk on the treadmill for a few minutes. Repeat until the walk- ing belt is properly tightened.

PROBLEM: The displays of the console do not function properly

SOLUTION: a. Remove the key from the console and UNPLUG THE POWER CORD. Next, remove the screws from the hood and carefully remove the hood. Locate the Reed Switch

(17)and the Magnet (12) on the left side of the Pulley (11). Turn the Pulley until the Magnet is aligned with the Reed Switch. Make sure that the gap between the Magnet and the Reed Switch is about 1/8”. If necessary, loosen the indicated Screw (44) and move the Reed Switch slightly. Retighten the Screw. Re-attach the hood and run the tread- mill for a few minutes to check for a correct speed reading.

a

b

 

a

 

1/8”

 

44

11

 

17

12

Top

 

View

 

24

Image 24
Contents QUESTIONS? Model No. RBTL12921 Serial NoCustomer HOT Line Table of Contents Important Precautions Page Before YOU Begin BackRight Side Assembly Make sure that no wires are pinched. See step Uprights 65 as shown, with the Bumpers 98 underTurn the Receiver B so the cylinder is on the side HOW to Plug in the Power Cord Treadmill OperationPerformant Lubetm Walking Belt Features of the Console HOW to Turn on the Power HOW to USE the Manual ModeWhen you are finished exercising, remove Adjust the incline of the treadmill to the lowestRemoved, the console is in the demo mode See page 20 and turn off the demo modeHOW to USE Preset Workout Programs Select one of the preset workout programsHOW to USE Heart Rate Programs Follow your progress with the displaysPut on the optional chest pulse sensor Select a heart rate programEnter your age and a maximum speed setting For the program HOW to Connect Your Portable Stereo HOW to Connect Your Home Stereo HOW to Connect Your ComputerHOW to Connect Your VCR Insert the key into the consolePress the Play button on your CD player or VCRWhenkey. the program is completed, remove HOW to USE Programs Directly from OUR WEB Site When the program has ended, remove the keyFollow the on-line instructions to start Program Return to the treadmill and stand on the footInformation MODE/DEMO Mode HOW to Adjust the Firmness of the Cushioning SystemOptional Chest Pulse Sensor HOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useProblem The walking belt slows when walked on Problem The displays of the console do not function properly Top ViewWalking and Weight Reduction Reebok UniversityWalking and Cardiorespiratory Endurance Walking and Reduced Risk for CARDIOVAS- Cular DiseaseWalking and Stress Reduction Walking and InjuriesReferences Exercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencySuggested Stretches Page R1203A Qty DescriptionHOW to Order Replacement Parts Part Identification ChartUse the chart below to identify small parts during assembly RBTL12921 Exploded Limited Warranty