Thermador POD301J, PODM301J, PODMW301J Data Plate, How to Obtain Service or Parts, Oven Problem

Oven Problem	Possible Causes and Suggested Solutions
Fan is running during modes that do not use convection.	On some models, the convection fan runs while the oven
	is preheating for the bake mode. This is normal.

Warm air or steam escapes from oven vent.

It is normal to see or feel steam or warm air escaping from the oven vent. Do not block the vent.

Cooling fan runs even when the oven is turned off.

This is normal. The cooling fan will continue to run, even after the oven has been turned off, until the oven has cooled sufficiently.

Oven door closes faster/slower than normal.

The soft-close door hinges contain a damping fluid that is affected by temperature. If the oven is in a cold envi- ronment, the door will close slower than it will in a warmer environment. A warmer than normal environ- ment, such as when cooking, may cause the door to close slightly faster.

Data Plate

The data plate shows the model and serial number. Refer to the data plate on the appliance when requesting service. The data plate location is shown in the following picture.

How to Obtain Service or Parts

To reach a service representative, see the contact information at the front of the manual. Please be prepared with the information printed on your product data plate when calling.

30