Reebok Fitness RBTL69920 Performant Lube, HOW to Plug in the Power Cord, Grounded Outlet Box

Page 11

OPERATION AND ADJUSTMENT

THE PERFORMANT LUBE

TM WALKING BELT

Your treadmill features a walking belt coated with

PERFORMANT LUBE TM , a high-performance lubricant.

IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking plat- form. Such substances will deteriorate the walking belt and cause excessive wear.

HOW TO PLUG IN THE POWER CORD

DANGER: Improper connection of the equipment-grounding conductor can

result in an increased risk of electric shock. Check with a qualified electrician or service- man if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product—if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

Your treadmill, like any other type of sophisticated electronic equipment, can be seriously damaged by sudden voltage changes in your home’s power. Voltage surges, spikes, and noise interference can result from weather conditions or from other appli-

ances being turned on or off.To decrease the pos- sibility of your treadmill being damaged, always

use a surge suppressor with your treadmill (see drawing 1 at the right). To purchase a surge sup- pressor, see your local REEBOK dealer or call 1- 800-806-3651 and order part number 146148.

Use only a single-outlet surge suppressor that is UL 1449 listed as a transient voltage surge sup- pressor (TVSS). The surge suppressor must have a UL suppressed voltage rating of 400 volts or less and a minimum surge dissipation of 450 joules. The surge suppressor must be electrically rated for 120 volts AC and 15 amps. There must be a monitoring light on the surge suppressor to indi- cate whether it is functioning properly. Failure to use a properly functioning surge suppressor could result in damage to the control system of the treadmill. If the control system is damaged, the walking belt may change speed or stop unexpect- edly, which may result in a fall and serious injury.

This product must be grounded.If it should malfunc-

tion or break down, grounding provides a path of least resistance for electric current to reduce the risk of elec- tric shock. This product is equipped with a cord having

an equipment-grounding conductor and a grounding plug. Plug the power cord into a surge suppressor, and plug the surge suppressor into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. Important: The treadmill is not compatible with GFCI-equipped outlets.

This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illus- trated in drawing 1 below. A temporary adapter that looks like the adapter illustrated in drawing 2 may be used to connect the surge suppressor to a 2-pole receptacle as shown in drawing 2 if a properly grounded outlet is not available.

1

Grounded Outlet Box

 

Surge Suppressor

 

Grounding Pin

Grounding Pin

 

Grounded Outlet

Grounding Plug

 

2

Grounded Outlet Box

Adapter

Surge Suppressor

Lug

Metal Screw

The temporary adapter should be used only until a properly grounded outlet (drawing 1) can be installed by a qualified electrician.

The green-colored rigid ear, lug, or the like extending from the adapter must be connected to a permanent

ground such as a properly grounded outlet box cover. Whenever the adapter is used it must be held in place

by a metal screw. Some 2-pole receptacle outlet box covers are not grounded. Contact a qualified elec-

trician to determine if the outlet box cover is grounded before using an adapter.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Mon.-Fri., 6 a.m.-6 p.m. MST QUESTIONS?Model No. RBTL69920 Serial No Customer HOT LineTable of Contents Treadmill is capable of high speeds Important PrecautionsUse the treadmill only as described Same circuit. Do not use an extension cordShown at 80% of actual size Never insert or drop any object into any openingRight Side Before YOU BeginFor your benefit, read this manual carefully before Left SideLeft AssemblyRubber mallet Wire cutters Phillips TightenIts side while you do this 55If. the connectors do not fit together easilyDo not fully 105 104 100 106 Insert two 1/2 Screws 51 into the two holesAttach the Left Foot Rail not shown in the same way 106Base Attach the Latch Assembly 37 and the Latch SpacerChest Pulse Sensor Troubleshooting HOW to USE the Chest Pulse SensorHOW to PUT on the Chest Pulse Sensor Chest Pulse Sensor Care and MaintenanceGrounded Outlet Box HOW to Plug in the Power CordPerformant Lube This product must be grounded.If it should malfuncTo reduce the possibility of electric shock Console DiagramFeatures of the Console HOW to USE the Manual Mode HOW to Turn on the PowerMeasure your heart rate, if desired See page 23 and turn off the demo modeTime/Incline/Segment Time display DisplayStart the program HOW to USE Personal Trainer ProgramsCompleted, all speed settings will move one col Press the Start button or the SpeedPercentages HOW to USE Heart Rate ProgramsFollow your progress with the displays Put on the chest pulse sensorDecrease Enter your ageVideocassettes HOW to Connect Your Portable CD PlayerHOW to Connect Your Portable Stereo HOW to Connect Your Computer HOW to Connect Your Home StereoAudio HOW to Connect Your VCRAudio Adapter Cable Insert the key into the consoleSpeed Next settings of the CD or video programWhen the CD or video program is completed, When you are finished using themHOW to USE Programs Directly from OUR WEB Site Speed Button so the display is blank Information MODE/DEMO ModeHOW to Fold the Treadmill for Storage Fat Calories/Heart Rate Display should be blankTripped Reset Position TroubleshootingHOW to Move the Treadmill HOW to Lower the Treadmill for USESolution Changing, remove the key Problem The chest pulse sensor does not function properlyBattery Belt has shifted to the leftExercise Frequency Conditioning GuidelinesExercise Intensity Workout GuidelinesPart No R0103A Ordering Replacement PartsLimited Warranty Icon Health & FITNESS, INC., 1500 S W., LOGAN, UTThick Base Pad Base Leg NutStar Washer Foot Rail WasherLift Frame Front Wheel Cover 108 Post Spacer On/Off SwitchPost Bolt IFit Wire Black Wire, 2F Key Qty DescriptionExploded R0103A
Top Page Image Contents