Reebok Fitness RCTL09707.0 manual HOW to Fold and Move the Treadmill, HOW to Move the Treadmill

Page 27

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL FOR STORAGE

Before folding the treadmill, adjust the incline to the lowest position. If you do not do this, you may damage the treadmill when you fold it. Remove the key and unplug the power cord. CAUTION: You must be able to safely lift 45 lbs. (20 kg) to raise, lower, or move the treadmill.

1.Hold the metal frame firmly in the location shown by the arrow at the right. CAUTION: To decrease the pos- sibility of injury, do not lift the treadmill by the plastic foot rails. To raise the frame, bend your legs, keep your back straight, and lift with your legs rather than your back. Raise the frame about halfway to the vertical position.

2.Raise the frame until the latch knob locks into the storage position. Make sure that the latch knob is locked in the storage position.

To protect the floor or carpet from damage, place a mat under the treadmill. Keep the treadmill out of di- rect sunlight. Do not leave the treadmill in the storage position in temperatures above 85° F (30º C).

HOW TO MOVE THE TREADMILL

Before moving the treadmill, convert it to the storage posi- tion as described above. Make sure that the latch knob is locked in the storage position.

1.Hold the handrails and place one foot against one of the wheels.

2.Tilt the treadmill back until it rolls freely on the wheels. Carefully move the treadmill to the desired location. Never move the treadmill without tipping it back. To reduce the risk of injury, use extreme caution while moving the treadmill. Do not attempt to move the treadmill over an uneven surface.

3.Place one foot against a wheel, and carefully lower the treadmill until it is resting in the storage position.

Frame

Frame

Latch Knob

Handrail

Wheel

27

Image 27
Contents Mon.-Fri., 800 until 1700 EST excluding holidays QUESTIONS?Model No. RCTL09707.0 Serial No Call TOLL-FREETable of Contents Important Precautions Page Power Lines Ground Standoff Clamp Service Insulators Before YOU Begin Assembly Make sure that the power cord is unpluggedFirmly tighten the Extension Leg Bolts Firmly tighten the Extension Leg Bolts Sleeve to make sure it is locked into place Start all four Console Bolts and then tighten them PinchedPage 105 HOW to Connect a DVD Player or a VCR HOW to Connect AN AntennaHOW to Connect a 75 OHM Catv Cable HOW to Connect AN External Source Using a Catv CableOperation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Console Diagram Features of the Console Telephone number on the front cover of thisManual HOW to USE the Manual Mode HOW to Turn on the PowerMeasure your heart rate if desired Press the Start button to start the program Select one of the fourteen preset programsHOW to USE a Pulse Program See on Select one of the four custom programs HOW to Create a Custom ProgramHOW to USE a Custom Program HOW to USE AN Ifit Card Press the Channel buttons to select the desired channel HOW to Operate the Personal TelevisionPress the Volume buttons to adjust the volume HOW to USE the Stereo Sound SystemPress the Power button again and add or re- move channels Information ModeOptional Chest Pulse Sensor HOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USE Problem The power turns off during use TroubleshootingProblem The walking belt slows when walked on Problem Television reception is poor Exercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesSuggested Stretches Qty Description R1207AQty Exploded Drawing A-Model No. RCTL09707.0 R1207A Exploded Drawing B-Model No. RCTL09707.0 R1207A Exploded Drawing C-Model No. RCTL09707.0 Exploded Drawing D-Model No. RCTL09707.0 R1207A Limited Warranty Ordering Replacement Parts