Reebok Fitness RBTL67708.1 manual Troubleshooting, Compatible with GFCI-equipped outlets

Page 22

TROUBLESHOOTING

Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on

SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor

is plugged into a properly grounded outlet (see page 12). Use only a single-outlet surge suppres-

sor that meets all of the specifications described on page 12. IMPORTANT: The treadmill is not

compatible with GFCI-equipped outlets.

 

 

b. After the power cord has been plugged in, make sure that the key is inserted into the console.

c. Check the reset/off circuit breaker located on the

c

 

treadmill frame near the power cord. If the switch

 

protrudes as shown, the circuit breaker has

 

 

tripped. To reset the circuit breaker, wait for five

Tripped

Reset

minutes and then press the switch back in.

PROBLEM: The power turns off during use

 

 

SOLUTION: a. Check the reset/off circuit breaker (see the drawing above). If the circuit breaker has tripped, wait for five minutes and then press the switch back in.

b.Make sure that the power cord is plugged in. If the power cord is plugged in, unplug it, wait for five minutes, and then plug it back in.

c.Remove the key from the console. Reinsert the key into the console.

d.If the treadmill still will not run, please see the front cover of this manual.

PROBLEM: The console displays remain lit when you remove the key from the console

SOLUTION: a. The console features a display demo mode, designed to be used if the treadmill is displayed in a

store. If the displays remain lit when you remove the key, the demo mode is turned on. To turn off

the demo mode, hold down the Stop button for a few seconds. If the displays are still lit, see THE

INFORMATION MODE on page 20 to turn off the demo mode.

 

PROBLEM: The displays of the console do not function properly

 

 

SOLUTION: a. Remove the key from the console and UNPLUG

a

78

THE POWER CORD. With the help of a second

person, carefully tip the Uprights (77, 78) down.

 

 

There may be three Hood Screws (A) in the bottom

 

 

of the Belly Pan (76). If there are, remove them.

 

 

Note: A Phillips screwdriver with a shaft at least 5

77

76

in. (13 cm) long is required.

Raise the Uprights (77, 78).

 

A

 

 

 

 

A

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MT QUESTIONS?Model No. RBTL67708.1 Serial No On the WEBTable of Contents Pulse sensor is not a medical device Important PrecautionsVarious factors, including the users move Page Before YOU Begin Assembly Do not fully fold the Frame yet Make sure that the power cord is unpluggedOvertighten the Nut the Wheel must turn Freely Right Upright do not fully tighten the Bolts Yet With a second Bolt Spacer 82, 3/8 x 4 Bolt 3/8 Star WasherNot fully fold the Frame yet Bolts yet See assembly steps 4 and 6. Firmly tighten the 3/8 x 4 Bolts Raise the Frame 52 to the position shown Be careful not to pinch the wires. ReattachThis step is completed HOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Console Diagram Features of the Console HOW to Turn on the Power HOW to USE the Manual ModeMonitor your progress with the displays. The matrix-When you Measure your heart rate if desiredHOW to USE a Preset Workout Start the walking beltHOW to USE the Custom Workouts Center Select the Custom Workouts CenterHOW to USE the Sound System HOW to USE the Weight Loss Workouts CenterSelect a weight loss workout Monitor your progress with the displays. See onHOW to USE AN Ifit Card Insert an iFit card and select a workoutInformation Mode Optional Chest Pulse SensorHOW to Lower the Treadmill for USE HOW to Fold and Move the TreadmillHOW to Move the Treadmill Knob is locked in the storage positionProblem The power turns off during use TroubleshootingCompatible with GFCI-equipped outlets Problem The walking belt slows when walked on Problem Solution Workout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencyPart LIST-Model No. RBTL67708.1 Key No. Qty DescriptionBlack Wire, M/F Exploded Drawing A-Model No. RBTL67708.1 R0210A Exploded Drawing B-Model No. RBTL67708.1 R0210A Exploded Drawing C-Model No. RBTL67708.1 R0210A Exploded Drawing D-Model No. RBTL67708.1 R0210A Limited Warranty Ordering Replacement PartsIcon Health & Fitness, Inc., 1500 S W., Logan, UT

RBTL67708.1 specifications

The Reebok Fitness RBTL67708.1 is a versatile and innovative exercise machine designed for fitness enthusiasts of all levels. This equipment combines efficiency with user-friendly features, making it an excellent choice for home workouts or gym environments.

One of the standout features of the RBTL67708.1 is its compact design, making it suitable for users who may have limited space. Despite its smaller footprint, it does not compromise on functionality. The machine is strategically designed to allow for a diverse range of exercises, targeting various muscle groups and promoting overall fitness.

The RBTL67708.1 incorporates advanced technology to enhance the user experience. Its digital display provides real-time feedback on key metrics such as time, speed, distance, and calories burned. This information is crucial for users looking to track their progress and set personal fitness goals. Moreover, the machine is equipped with built-in workout programs that cater to different fitness levels, from beginners to advanced users. These programs provide structured guidance, ensuring that workouts remain challenging and effective.

Another significant characteristic of the RBTL67708.1 is its adjustable settings. Users can modify resistance levels easily, tailoring their workouts to their fitness levels or specific training goals. This adaptability not only makes the machine suitable for a wide range of users but also allows for progressive overload, which is essential for muscle growth and strength development.

Comfort is also a priority in the design of the Reebok Fitness RBTL67708.1. The ergonomically designed handles offer a comfortable grip, while the seat provides ample support during workouts. This thoughtful design minimizes the risk of injury and enhances performance, allowing users to focus fully on their routines.

Durability is another key characteristic of this fitness machine. Built with high-quality materials, the RBTL67708.1 is designed to withstand rigorous use, ensuring longevity and performance over time.

In summary, the Reebok Fitness RBTL67708.1 is an impressive piece of fitness equipment that combines a compact design with advanced technology. Its adjustable features, comfortable construction, and variety of workout programs make it an essential tool for anyone looking to enhance their fitness journey. Whether you are just starting out or are an experienced athlete, the RBTL67708.1 supports a broad range of fitness goals and delivers a reliable workout experience.
Top Page Image Contents