Reebok Fitness RBTL67708.1 manual Problem Solution

Page 24

PROBLEM:

SOLUTION:

The walking belt is off-center or slips when walked on a. If the walking belt is off-center, first remove the

key and UNPLUG THE POWER CORD. If the walking belt has shifted to the left, use the hex key to turn the left idler roller bolt clockwise 1/2 of a turn; if the walking belt has shifted to the right, turn the bolt counterclockwise 1/2 of a turn. Be careful not to overtighten the walking belt. Then, plug in the power cord, insert the key, and run the treadmill for a few minutes. Repeat until the walk- ing belt is centered.

b. If the walking belt slips when walked on, first re- move the key and UNPLUG THE POWER CORD. Using the hex key, turn both idler roller bolts clock- wise, 1/4 of a turn. When the walking belt is cor- rectly tightened, you should be able to lift each edge of the walking belt 2 to 3 in. (5 to 7 cm) off the walking platform. Be careful to keep the walk- ing belt centered. Then, plug in the power cord, in- sert the key, and carefully walk on the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

a

b

24

Image 24

Contents QUESTIONS? Model No. RBTL67708.1 Serial NoMon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MT On the WEBTable of Contents Important Precautions Pulse sensor is not a medical deviceVarious factors, including the users move Page Before YOU Begin Assembly Make sure that the power cord is unplugged Do not fully fold the Frame yetOvertighten the Nut the Wheel must turn Freely With a second Bolt Spacer 82, 3/8 x 4 Bolt 3/8 Star Washer Right Upright do not fully tighten the Bolts YetNot fully fold the Frame yet Bolts yet See assembly steps 4 and 6. Firmly tighten the 3/8 x 4 Bolts Be careful not to pinch the wires. Reattach Raise the Frame 52 to the position shownThis step is completed Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Console Diagram Features of the Console HOW to Turn on the Power HOW to USE the Manual ModeMonitor your progress with the displays. The matrix-When you Measure your heart rate if desiredHOW to USE a Preset Workout Start the walking beltHOW to USE the Custom Workouts Center Select the Custom Workouts CenterHOW to USE the Weight Loss Workouts Center Select a weight loss workoutHOW to USE the Sound System Monitor your progress with the displays. See onHOW to USE AN Ifit Card Insert an iFit card and select a workoutInformation Mode Optional Chest Pulse Sensor HOW to Fold and Move the Treadmill HOW to Move the Treadmill HOW to Lower the Treadmill for USE Knob is locked in the storage positionTroubleshooting Problem The power turns off during useCompatible with GFCI-equipped outlets Problem The walking belt slows when walked on Problem Solution Exercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencyPart LIST-Model No. RBTL67708.1 Key No. Qty DescriptionBlack Wire, M/F Exploded Drawing A-Model No. RBTL67708.1 R0210A Exploded Drawing B-Model No. RBTL67708.1 R0210A Exploded Drawing C-Model No. RBTL67708.1 R0210A Exploded Drawing D-Model No. RBTL67708.1 R0210A Ordering Replacement Parts Limited WarrantyIcon Health & Fitness, Inc., 1500 S W., Logan, UT