Life Fitness 93T operation manual Centering the Belt

Page 14

To enter the Clock's configuration, press and hold down the PAUSE key and press the CLEAR key twice. Continue to hold down the PAUSE key until the MESSAGE CENTER displays the words "SER- VICE MENU". Then, release the PAUSE key and press the QUICK START key. The MESSAGE CENTER then displays "MANAGER CONFIG". Press the TIME down arrow key once - message center displays "CLOCK CONFIGURATION". Press the Enter key to access the CLOCK CONFIG MENU.

Use arrow keys to select an item you want to change. You can select the following:

Set Day

Set Date

Set Time

Press ENTER on the item you want to change. Use the arrow keys to change the item and then

press ENTER. Your changes will be saved and then you will see "CLOCK SET TO LOCAL" in the display. Once you see this message you can press the CLEAR key 3 times to exit the Clock configu- ration mode.

CENTERING THE BELT

After installing and levelling the treadmill, check the belt to ensure that it is tracking properly. First, plug the power cord into an appropriate outlet. See Electrical Requirements at the beginning of this section for details. Then, turn the treadmill ON.

Have one person stand on the platforms on either side of the treadmill belt. Do not stand on the belt at this time. Press the QUICK START key, and increase the speed to 4.0 miles per hour (MPH), or 6.4 kilometers per hour (KPH), using the SPEED UP arrow.

If the striding belt moves to the right while it is running, have a second person turn the right tension bolt a quarter-turn clockwise, and then turn the left tension bolt (A) a quarter-turn counter-clockwise. See the illustration below. This action sets the striding belt tracking back to center of the roller.

If the striding belt moves to the left, turn the left tension bolt a quarter-turn clockwise and then turn the right tension bolt a quarter-turn counter-clockwise to start the striding belt tracking back to center of roller.

Repeat these adjustments until striding belt appears centered. Allow the belt to continue running for several minutes to be sure that the tracking is stabilized.

NOTE: Do not exceed one full turn of the adjusting screws in either direction. If, after one full turn, the belt does not track properly, contact Customer Support Services. The phone numbers are listed in Section 6.7, titled How to Obtain Product Service.

13

Image 14
Contents 93T Treadmill Corporate Headquarters International OfficesPage Table of Contents Page 93T Important Safety Instructions Getting StartedFor Future Reference Consignes DE Sécurité Importantes DémarrageConserver CES Instructions Pour Tout Usage Ultérieur Grounding Instructions SetupElectrical Power Requirements WAX BAG Instructions Setting the Clock HOW to Position and Stabilize the Life Fitness TreadmillPower Switch Centering the Belt Fitness Networking Power Cord Routing Display Console Display Console OverviewDisplay Console Descriptions Message CenterReading Rack and Accessory Trays WHY Heart Rate Zone Training EXERCISE? Heart Rate Zone Training ExerciseHeart Rate Monitoring Optional Heart Rate Chest StrapWorkout Overviews Using the WorkoutsWorkouts Workout Descriptions Hill Random Inactive Active Very Active Rating 20-29 30-39 40-49 50-59 60+ FAT Burn Maximizing Workouts on a Life Fitness Treadmill Using Instapacetm FeedbackUsing Zerouttm Speed Control Selecting AN Intensity LevelLogging on to the Network HOLD-N-SCROLLMANAGER’S Configuration Entering and Using the MANAGER’S ConfigurationConfiguration Settings Configuration Factory Setting Default DescriptionUsing the Start Message Setup Using the Maxtimetm SetupUsing the Standby Setup Service and Technical Data Preventative Maintenance TipsPreventative Maintenance Schedule Weekly Monthly Quarterly BI-ANNUAL AnnualTroubleshooting the Treadmill Malfunction Probable Cause Corrective ActionMalfunction Probable Cause Corrective Action Troubleshooting the Treadmill Troubleshooting the Optional Heart Rate Chest Strap Heart Rate Reading is Erratic or Absent EntirelyTracking Centering a Striding Belt HOW to Adjust and Tension the Striding BeltBelt Tensioning Bolts Tensioning AN Existing Striding Belt Cleaning the WAX Nozzle HOW to Obtain Product Service Specifications Life Fitness 93T Treadmill SpecificationsM051-00K58-B081
Related manuals
Manual 42 pages 46.07 Kb