3.5INSTALLING THE HANDRAILS
Attach the RIGHT HANDRAIL (7). The handrails are marked “R” or “L”.
a)Slide the handrail into the tube at the console.
b)Install two M8 X 15MM BLACK SCREWS (8) with two FLAT WASHERS (13) on the top of the handrail. Finger tighten the screws.
c)Install the M8 X 60MM BLACK SCREWS (6) and STAR WASHER (3) at the bottom of the handrail. Finger tighten the screws.
7
| 13 | 13 |
8 |
| |
| 8 | |
|
|
6 | 3 | 6 | 3 |
| |||
|
| ||
|
|
|
7
Repeat the above procedure for the LEFT HANDRAIL (7).
3.6TIGHTENING THE SCREWS
Use the supplied 6MM HEX WRENCH to tighten all 18 screws on the user assembly points.
3.7ATTACHING THE POWER CORD
Insert the female plug of your treadmill’s power cord into the male outlet next to your treadmill’s power switch.
11