LifeSpan TR4000I, TR3000i manual Handlebar Support Post Assembly

TR3000i / TR4000i

Step 1: Handlebar Support Post Assembly

Folding Treadmill

A.Remove the screw (A) and nut (E) that are pre-assembled on the frame from each side of the base using the 6 mm Allen wrench and 17 mm open end wrench provided in your tool kit. These two screws will prevent the handlebars from rotating up into their upright position.

B.Stand the support posts and handlebars up into their operating position and re-attach the screw (A) and nut (E) removed in step 1. Tighten securely.

E

A

G

13

C.Attach the left (13) and right (14) base covers using Phillips screwdriver and 2 machine screws on each side. The 4 base cover attaching screws are located in the hardware bag.