LifeSpan TR1200I manual Handlebar Assembly

Page 11

TR800 / TR1200i

Folding Treadmill

Step 3: Handlebar Assembly

A.Rotate the handlebars down so they are positioned on top of the handlebar posts. Secure the right and left handlebars to the support post using the 2 M8 x70L screws (B) provided in the hardware bag sure there are no wires obstructing the bolt hole. Also, lightly pulling the handlebar one way or the other will help line up the bolt holes.

Note: Make sure that the wires on both sides are not pinched in-between the handlebars and the handlebar post.

B.Rotate the console bracket (8) up in the back until it reaches its normal operating position.

C.Place the left outside handlebar cover (9) next to the inside handlebar cover (pre-attached).

allowing the plastic ridge to sit in the groove of the blue rubber ring. Secure these three parts together using the self-tapping screws (C), which are pre-installed in the outer cover. Repeat this process on the other side with the right outside handlebar cover (10).

10 8

B

9

C

*Note: the TR800 inside handlebar cover is not pre-attached and comes in two pieces.

TR800

12

blue rubber ring

X

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents TR800 / TR1200i Page TR800 / TR1200i Page Manual, Preset 17, User Set-up 2, Heart Rate Control TR800 and TR1200i Folding Treadmills Treadmill Folding Treadmill Page Tools and Screws included in Hardware Bag TR800 / TR1200iUnpacking Treadmill Handlebar Assembly Assemble Console Components Attach Console AssemblyLock Console Angle Attach the Back Cover PlateCut red tie strap and roll out of box Plug the power cord in and turn the treadmill onInstall safety key TR1200i only Set Time and Date TR800 TR1200i Display Console OverviewTR800 / TR1200i TR1200i shown Operating Your Treadmill Starting in Manual ModeTR800 / TR1200i Custom User Set-up Programs Workout information Innovative Features TR1200i onlyIncline Speed Incline Speed Long Interval 40 minute default Moderate Interval 30 minute defaultIncline Speed 30 minute default Incline Speed Fartlek 30 minute defaultIncline Speed Incline Speed 20 minute default Ladder 30 minute default40 minute default Incline Speed Incline Speed 30 minute default Belt Lubrication Cleaning and MaintenanceAligning the Running Belt Belt TensioningFolding the Treadmill Moving and StorageUnfolding the Treadmill Troubleshooting 000 100599 En or SiPage TR800 / TR1200i Page Page Serial Number
Top Page Image Contents