TR800 / TR1200i
Folding Treadmill
Engineering Mode
Press STOP and then SPEED UP to enter the Engineering Mode. You can press ENTER/MODE to switch setup screens, or press STOP+SPEED UP to return to Standby Mode. The table below shows the sequence of the setup screens.
| Engineering function | Information on screen |
| ||
| Press and Hold STOP and then Speed Up buttons |
| ENG. |
|
|
| until the console beeps and the display changes. | 100 |
|
| |
| MODE |
|
| ||
|
|
|
|
| |
| (incline window shows software version) |
|
| 2009.07.09 |
|
| (lower right corner shows software version date) |
|
|
| |
|
|
|
|
|
|
| Press Enter / Mode (TR1200i only) |
|
|
|
|
| Guard automatically pauses the unit if it detects the |
| I - G |
|
|
|
|
|
|
| |
| treadmill is not being walked on. Use UP / DOWN |
|
| On |
|
|
|
|
|
| |
|
|
|
|
|
|
| Press Enter / Mode to show Roller diameter |
| ROL | 599 |
|
| TR800: roller diameter in inch |
|
| ||
|
|
|
|
| |
| TR1200i: roller diameter in mm |
|
|
|
|
| Press Enter / Mode to set up the units of measurement |
|
|
|
|
| in Metric (SI) or in English (EN). | En or Si |
|
|
|
| Press Speed / Incline or UP / DOWN to change |
|
|
|
|
|
|
|
|
|
|
| Press Enter / Mode to set up Calendar |
|
|
|
|
| Calendar Operation: |
| CALE |
|
|
|
|
| NDER | On |
|
|
|
|
|
| |
|
|
|
|
|
|
| Press Enter / Mode to turn console sleep mode on |
|
|
|
|
| display lit all the time. |
|
|
|
|
|
|
|
|
|
|
| Press Enter / Mode for Distance | 0 | DIS | 000 |
|
| This is the total distance the treadmill has been run |
| |||
|
|
|
|
| |
| in Miles or Kilometers depending on what mode the |
|
|
|
|
| treadmill is in. |
|
|
|
|
|
|
|
|
|
|
| Press Enter / Mode for Workout Time | 0 | HOUR | 000 |
|
| This is the total number of hours the treadmill |
| |||
| has been used. |
|
|
|
|
|
|
|
|
|
|
Press Enter / Mode again to return to the standby mode.
35