LifeSpan TR4000I manual Assemble Console Components, Attach Console Assembly

Step 4: Assemble Console Components

A.Attach the blue accessory trays (6) to the bottom of the console housing using 8 self tapping screws (G). Preinstalled in console housing (25).

B.Attach the console (5) to the console housing (25) using 6 screws (G). These screws are pre-installed on the back of the

and then reinstalled with the console in place.

25

G

5

G

6

Step 5: Attach Console Assembly

A.Place the console assembly onto the console housing frame mount (8) and attach the assembly using the 7 screws (F), preinstalled in console housing (25). Be sure not to pinch wire harnesses during this step.

B.Connect all wire harnesses including:

i.Main Harness: 5-pin and 7-pin

ii.Hand Pulse harness: 2-pin (color doesn’t matter.)

iii.Speed Control Harness: 3-pin

(the wire colors need to be matched.)

iv.Incline Control Harness: 3-pin (the wire colors need to be matched)

C.Tuck extra wiring harness into the opening behind the console.

F

8

Note: Be careful to properly connect all wiring connectors with their correct corresponding wiring harness. Pay attention not to bend any pins and make sure the connectors click in place.

12