Epic Fitness EPTL88105.0 manual Troubleshooting, Problem The power turns off during use

Page 25

TROUBLESHOOTING

Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual.

PROBLEM: The power does not turn on

SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor is plugged into a properly grounded outlet (see page 11). Use only a single-outlet surge suppres- sor that meets all of the specifications described on page 11. Important: The treadmill is not com- patible with GFCI-equipped outlets.

b.Make sure that the key is inserted into the console.

c.Check the reset/off circuit breaker located on the frame near the power cord. If the switch protrudes as shown, the circuit breaker has tripped. To reset the circuit breaker, wait for five minutes and then press the switch back in.

PROBLEM: The power turns off during use

c

Off Reset

SOLUTION: a. Check the reset/off circuit breaker (see 1. c. above). If the circuit breaker has tripped, wait for five minutes and then press the switch back in.

b.Make sure that the power cord is plugged in. If the power cord is plugged in, unplug it, wait for five minutes, and then plug it back in.

c.Remove the key from the console and then reinsert it.

PROBLEM: The displays of the console do not function properly

SOLUTION: a. Remove the key from the console and UNPLUG THE POWER CORD. Place the treadmill in the storage position (see HOW TO FOLD AND MOVE THE TREADMILL on page 23).

Next, remove the two indicated 3/4” Screws (4).

Lower the treadmill (see HOW TO LOWER THE TREAD- MILL FOR USE on page 24). Remove the four indicated 3/4” Screws (4), and remove the Hood (44).

4

4

4

4

44

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Model No. EPTL88105.0 Serial No QUESTIONS?Call TOLL-FREE Mon.-Fri., 6 a.m.-6 p.m. MSTTable of Contents Important Precautions Page Front Before YOU BeginBack Right SideAssembly Page Page Page Small Screws Cylinder Wire Treadmill Operation HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt HOW to Turn on the Power Features of the ConsoleHOW to USE the Manual Mode Distance Measure your heart rate if desired Select a preset program HOW to USE a Preset ProgramAdjust the program settings if desired Press the Start button to start the programFollow your progress with the displays Select one of the custom programs HOW to Create a Custom ProgramHOW to USE a Custom Program Put on the optional chest pulse sensor HOW to USE a Heart Rate ProgramSelect a heart rate program Follow your progress with the displays Important The Pulse display should be blank. If Information MODE/DEMO ModeOptional Chest Pulse Sensor HOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USE Problem The power turns off during use TroubleshootingProblem The walking belt slows when walked on Gap between the Magnet and the Reed Switch isTop Exercise Intensity Exercise GuidelinesWorkout Guidelines Exercise FrequencySuggested Stretches Page Qty Description R0905DQty Exploded DRAWING-Model No. EPTL88105.0 100 78 72 104 102 Limited Warranty HOW to Order Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT
Top Page Image Contents