Epic Fitness EPTL88105.0 manual Distance

Page 14

Follow your progress with the matrix and the

6 displays.

The matrix—When the manual mode is se- lected, the matrix will show a track that repre- sents 1/4 mile. As you exercise, the indicators

around the track will light in succession until the entire track is lit. The track will then darken and the indicators will again begin to light in succes- sion.

The Incline display— This display will show the incline level of the tread- mill.

The Time display—If no goals were set, this display will show the elapsed time. If a goal was set, the display will

show the time remain-

ing in your workout. Note: When a program is se- lected (except for the first heart rate program), the display will show the time remaining in the pro- gram.

The Distance

display—If no goals were set, this display will show the distance

that you have walked or run. If a goal was

set, the display will show the distance still to be walked or run during your workout. Note: When a preset program or a custom program is selected, the display will show the distance still to be walked or run during the program.

The Calories display— If no goals were set, this display will show the ap- proximate number of calories you have burned. If a goal was

set, the display will show the number of calories still to be burned during your workout. Note: When a preset program or a custom program is selected, the display will show the number of calories still to be burned during the program.

The Pulse display—The display will show your heart rate when you use the handgrip pulse sensor (see step 7 on page 15) or the optional chest pulse sensor.

The Speed display— This display will show the speed of the walking belt.

Note: The console can

display speed and dis- tance in either miles or kilometers. To determine which unit of measure-

ment is selected, hold

down either of the Stop buttons while inserting the key into the console. An “E” for English miles or an “M” for metric kilometers will appear in the Calories display. Press the Speed increase button to change the unit of measurement. When the de- sired unit of measurement is selected, remove the key and then reinsert it.

To reset the displays, press either of the Stop but- tons, remove the key, and then reinsert the key.

If a workout goal was set, the walking belt will au- tomatically slow to a stop when the goal is reached. If two workout goals were set, the walk- ing belt will stop when both goals are reached.

14

Image 14
Contents Call TOLL-FREE QUESTIONS?Model No. EPTL88105.0 Serial No Mon.-Fri., 6 a.m.-6 p.m. MSTTable of Contents Important Precautions Page Back Before YOU BeginFront Right SideAssembly Page Page Page Small Screws Cylinder Wire PRE-LUBRICATED Walking Belt HOW to Plug in the Power CordTreadmill Operation Features of the Console HOW to Turn on the PowerHOW to USE the Manual Mode Distance Measure your heart rate if desired Adjust the program settings if desired HOW to USE a Preset ProgramSelect a preset program Press the Start button to start the programFollow your progress with the displays HOW to Create a Custom Program Select one of the custom programsHOW to USE a Custom Program Select a heart rate program HOW to USE a Heart Rate ProgramPut on the optional chest pulse sensor Follow your progress with the displays Optional Chest Pulse Sensor Information MODE/DEMO ModeImportant The Pulse display should be blank. If HOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useTop Gap between the Magnet and the Reed Switch isProblem The walking belt slows when walked on Workout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencySuggested Stretches Page R0905D Qty DescriptionQty Exploded DRAWING-Model No. EPTL88105.0 100 78 72 104 102 Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT HOW to Order Replacement PartsLimited Warranty