Epic Fitness eptl20912.0 manual

Page 10

7.Identify the Left and Right Trays (107, 109).

Press the Left and Right Trays (107, 109) into the console assembly (E).

7
107	109
E

8.Raise the Frame (61) to the position shown.

Have a second person hold the Frame until this step is completed.

Remove the 3/8" x 2 3/8" Bolt (7) and the 3/8" Nut (8) from the Storage Latch (65). If there is a tie through the bracket on the Frame (61), remove it.

Align the upper end of the Storage Latch (65) with the holes in the bracket on the Frame (61). Attach the Storage Latch with the 3/8" x

2 3/8" Bolt (7) and the 3/8" Nut (8) that you just removed. Do not overtighten the Nut.

Lower the Frame (61) as described on page 27.

8
	61
8	7
	7
	65

9.Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill.

Note: Extra parts may be included. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see page 29).

10

Image 10

Contents Visit OUR Website QUESTIONS?Model No. EPTL20912.0 Serial No CallTable of Contents Important Precautions Page Before YOU Begin Part Identification Chart Assembly Power cordSee the inset drawing. Press the left handrail Decal is on the side of the Cover as shownBe careful not to pinch the Upright Again. if YOU do not Connect the CON Connect the pulse wires on the right side not Shown alsoSide is shown. Start all four Screws and then Tighten them Page Troubleshooting HOW to PUT on the Heart Rate MonitorCare and Maintenance Chest Heart Rate MonitorHOW to Connect the Power Cord Operation and AdjustmentUse a Surge Suppressor Features of the Console DiagramConsole HOW to Turn on the Power HOW to USE the Touch ScreenHOW to SET UP the Console HOW to USE the Manual Mode Key from the console When you are finished exercising, removePower cord. Important If you do not do This, the treadmill’s electrical components maySelect an onboard workout HOW to USE AN Onboard WorkoutStart the workout HOW to USE a SET-A-GOAL Workout Select the main menu. See on Select a set-a-goal workoutHOW to Create a USER-DEFINED Workout Select a user-defined workoutHOW to USE a USER-DEFINED Workout Change the workout if desiredHOW to USE AN Ifit Workout Start the workout. See onHOW to USE the Equipment Settings Mode HOW to USE the Maintenance Mode Set up and manage a wireless network connection HOW to USE the Wireless Network ModeEnable Wi-Fi Exit the wireless network modeMake sure that your audio wire is fully plugged HOW to USE the Stereo Sound SystemHOW to USE the Internet Browser HOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill HOW to Lower the Treadmill for USESymptom The power turns off during use TroubleshootingSymptom The iFit mode does not function correctly Symptom The walking belt slows when walked on Cleaning MaintenanceStorage Workout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencySuggested Stretches Part List Qty DescriptionDescription Qty Exploded Drawing a Exploded Drawing B Exploded Drawing C Exploded Drawing D Exploded Drawing E Limited Warranty Ordering Replacement PartsIcon Health & Fitness, Inc., 1500 S W., Logan, UT