Gold's Gym GGTL59608 manual With a second Bolt Spacer 84, 3/8 x 4 Bolt 3/8 Star Washer

3.	Identify the Right Upright (79) and the Right	3
	Upright Spacer (83), which are marked with
	stickers. Insert the Upright Wire (86) through the				79
	Right Upright Spacer as shown. Then, set the	86	Wire Tie
	Right Upright Spacer on the Base (60).					86
	Have a second person hold the Right Upright
	(79) near the Base (60). See the inset drawing.						83
	Tie the wire tie in the Right Upright securely
	around the end of the Upright Wire (86). Then,
	pull the other end of the wire tie until the Upright
	Wire is routed completely through the Right
	Upright.		79			60
		86
			Wire
			Tie
4. Press a Base Cap (85) into the Base (60).		4		5
	Hold a Bolt Spacer (84) inside the lower end of		79
	the Right Upright (79). Insert a 3/8" x 4" Bolt (5)
	with a 3/8" Star Washer (12) into the Right			12
	Upright and the Bolt Spacer. Repeat this step
	with a second Bolt Spacer (84), 3/8" x 4" Bolt					84
	(5), and 3/8" Star Washer (12).
	Hold the Right Upright (79) against the Right				84
	Upright Spacer (83). Be careful not to pinch			83		85
	the Upright Wire (86). Tighten the 3/8" x 4"
	Bolts (5) until the heads of the Bolts touch the
	Right Upright; do not fully tighten the Bolts			60
	yet.

8