Gold's Gym GGTL59608 manual Bolts yet

Page 9

5.With the help of a second person, carefully tip the treadmill onto its right side. Partially fold the Frame (53) so that the treadmill is more stable; do not fully fold the Frame yet.

Attach a Wheel (90) to the Base (60) with a 3/8" x 2" Bolt (3) and a 3/8" Locknut (11). Do not overtighten the Locknut; the Wheel must turn freely.

6.Press a Base Cap (85) into the Base (60). Hold a Bolt Spacer (84) inside the lower end of the Left Upright (77). Insert a 3/8" x 4" Bolt (5) with a 3/8" Star Washer (12) into the Left Upright and the Bolt Spacer. Repeat this step with a second Bolt Spacer (84), 3/8" x 4" Bolt (5), and 3/8" Star Washer (12).

Hold the Left Upright Spacer (82) and the Left Upright (77) against the Base (60). Tighten the 3/8" x 4" Bolts (5) until the heads of the Bolts touch the Left Upright; do not fully tighten the

Bolts yet.

With the help of a second person, tip the tread- mill so that the Base is flat on the floor.

5

 

 

 

 

 

 

 

53

3

 

 

 

 

 

 

60

11

90

 

 

 

 

 

 

 

6

5

 

 

77

 

 

 

 

12

82

 

 

 

84

 

 

 

 

 

 

85

84

 

 

 

 

60

 

 

 

9

Image 9
Contents Model No. GGTL59608.0 Serial No QUESTIONS?Table of Contents Important Precautions Local electronics storePulse sensor is not a medical device Page Before YOU Begin Assembly Make sure that the power cord is unplugged Do not fully fold the Frame yetOvertighten the Locknut the Wheel must Turn freely Right Upright do not fully tighten the Bolts Yet With a second Bolt Spacer 84, 3/8 x 4 Bolt 3/8 Star WasherBolts yet Attach the other resistance mechanism to 3/4 Bolt 112. Do not fully tighten Resistance KnobRight Upright 79 as described above Attach the other Crosswalk Arm 98 as deAgain. if the Connectors are not CON PowerCareful not to pinch the wires Be careful not to pinch the wires in the Right Handrail Make sure that no wires are pinched Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Features of the Console Console DiagramHOW to USE the Manual Mode HOW to Turn on the PowerSelect the manual mode Insert the key into the consoleTurn on the fan if desired HOW to USE a Preset Workout Select one of the preset workouts. To select oneStart the workout HOW to USE the Stereo Sound System Information ModeOptional Chest Pulse Sensor HOW to USE the Crosswalk ArmsHOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USETroubleshooting Problem The power turns off during useCompatible with GFCI-equipped outlets Top Problem The walking belt slows when walked onProblem Solution Exercise Intensity Exercise GuidelinesWorkout Guidelines Exercise FrequencyKey No. Qty Description Part LIST-Model No. GGTL59608.0109 Console Fan Userʼs Manual Exploded Drawing A-Model No. GGTL59608.0 R0509B Exploded Drawing B-Model No. GGTL59608.0 R0509B Exploded Drawing C-Model No. GGTL59608.0 R0509B Exploded Drawing D-Model No. GGTL59608.0 Ordering Replacement Parts Limited WarrantyIcon Health & Fitness, Inc., 1500 S W., Logan, UT