Gold's Gym GGCTL59611.0 manual Troubleshooting, Symptom The power does not turn on

Page 22

TROUBLESHOOTING

Most treadmill problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assis- tance is needed, see the front cover of this manual.

SYMPTOM: The power does not turn on

a.Make sure that the power cord is plugged into a surge suppressor and that the surge suppressor is plugged into a properly-grounded outlet (see page 14). Use only a single-outlet surge suppressor that meets all of the specifications described on page

14. IMPORTANT: The treadmill is not compat- ible with GFCI-equipped outlets and may not be compatible with AFCI-equipped outlets.

b.After the power cord has been plugged in, make sure that the key is inserted into the console.

c.Check the power switch located on the treadmill frame near the power cord. If the switch protrudes as shown, the switch has tripped. To reset the power switch, wait for five minutes and then press the switch back in.

c

Tripped

Reset

SYMPTOM: The power turns off during use

a.Check the power switch (see the drawing above).

If the switch has tripped, wait for five minutes and then press the switch back in.

b.Make sure that the power cord is plugged in. If the power cord is plugged in, unplug it, wait for five minutes, and then plug it back in.

c.Remove the key from the console, and then reinsert it.

d.If the treadmill still will not run, please see the front cover of this manual.

SYMPTOM: The displays of the console do not function properly

a.Remove the key from the console and UNPLUG THE POWER CORD. Place the treadmill in the storage position (see HOW TO FOLD THE TREADMILL on page 21).

a

6

6

Next, remove the two indicated #8 x 3/4" Screws

(6).

22

Image 22
Contents QUESTIONS? Model No. GGCTL59611.0 Serial NoTable of Contents Important Precautions Page Before YOU Begin Part Identification Chart Assembly Make sure that the power cord is unpluggedWire Tie Wires Attach the Right Handrail Tube not shown in the same way Again. if YOU do not Connect the CON Make sure that no wires are pinchedBolts before tightening them Page Page Raise the Frame 49 to the position shown HOW to Connect the Power Cord Operation and AdjustmentUse a Surge Suppressor Console Diagram Features of the Console Select the manual mode HOW to Turn on the PowerHOW to USE the Manual Mode Insert the key into the consoleMeasure your heart rate if desired Time/Distance display-When the manual modeChange the incline of the treadmill as desired Monitor your progress with the displaysSelect a time for the workout HOW to USE a WEIGHT-LOSS WorkoutSelect a user weight Select the amount of calories you want to burnCOOL-DOWN Mode HOW to USE AN IFIT WORKOUTInsert an iFit card and select a workout HOW to USE the Stereo Sound System Information ModeHOW to USE the Crosswalk Arms HOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill HOW to Lower the Treadmill for USESymptom The power does not turn on TroubleshootingSymptom The power turns off during use Symptom The walking belt slows when walked on Page Workout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencyPart List Qty DescriptionDescription Qty Exploded Drawing a Exploded Drawing B Exploded Drawing C Exploded Drawing D Ordering Replacement Parts Limited Warranty