Gold's Gym GGTL10109.0 manual Problem Solution, Walking belt is off-center or slips when walked on

Page 27

PROBLEM:

SOLUTION:

The walking belt is off-center or slips when walked on

a.If the walking belt is off-center, remove the key and

UNPLUG THE POWER CORD. If the walking belt has shifted to the left, use the hex key to turn the left idler roller bolt clockwise 1/2 of a turn; if the walk- ing belt has shifted to the right, turn the left idler roller bolt counterclockwise 1/2 of a turn. Be careful not to overtighten the walking belt. Plug in the power cord, insert the key, and run the treadmill for a few minutes. Repeat until the walking belt is centered.

b.If the walking belt slips when walked on, first remove the key and UNPLUG THE POWER CORD. Using the hex key, turn both idler roller bolts clockwise, 1/4 of a turn. When the walking belt is correctly tightened, you should be able to lift each edge of the walking belt 3 to 4 in. (8 to 10 cm) off the walking platform. Be careful to keep the walking belt centered. Then, plug in the power cord, insert the key, and carefully walk on the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

a

b

27

Image 27
Contents Model No. GGTL10109.0 Serial No QUESTIONS?Table of Contents Important Precautions Page Before YOU Begin Assembly Tek Screws 4 do not overtighten Make sure that the power cord is unpluggedNot fully fold the Frame until the treadmill is Completely assembledTighten the Bolts yet See the inset drawing. Tie the wire tieNectors should slide together easily Pulse Bar. See the inset drawing. The con113 Console Assembly Patch Bolts before tightening any of them Uprights. Be careful not to pinch any wiresPage Page Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Audio DiagramFeatures of the Console ConsoleHOW to USE the Manual Mode HOW to Turn on the PowerTurn on the fans if desired Follow your progress with the displays. The matrix-When youMeasure your heart rate if desired. Before using DistanceHOW to USE a Speed Workout Select a speed workoutStart the walking belt Select a custom workout HOW to Create a Custom WorkoutHOW to USE a Custom Workout Insert an iFit card and select a workout HOW to USE AN Ifit WorkoutInformation Mode HOW to USE the Stereo Sound SystemMake sure that the audio wire is fully plugged HOW to Move the Treadmill HOW to Fold and Move the Treadmill HOW to Lower the Treadmill for USE Compatible with GFCI-equipped outlets TroubleshootingProblem The power turns off during use Important The treadmill is notTop Problem The walking belt slows when walked onWalking belt is off-center or slips when walked on Problem SolutionExercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesKey No. Qty Description Part LIST-Model No. GGTL10109.0Qty GGTL10109.0 Exploded Drawing B-Model No. GGTL10109.0 R0909A Exploded Drawing C-Model No. GGTL10109.0 R0909A Exploded Drawing D-Model No. GGTL10109.0 R0909A Exploded Drawing E-Model No. GGTL10109.0 R0909A Ordering Replacement Parts Limited WarrantyIcon Health & Fitness, Inc., 1500 S W., Logan, UT