Gold's Gym GGTL10109.0 manual Assembly

Page 6

ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480.

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the top of the walking belt or the shipping carton. This is normal and does not affect treadmill performance. If there is lubri- cant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex keys and your own Phillips screwdriverand

adjustable wrench .

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it is preattached to one of the parts to be assembled. To avoid damaging plastic parts, do not use power tools for assem- bly. Extra hardware may be included.

 

3/8" Star

 

 

#8 x 1/2" Screw

#8 x 3/4" Screw

Base Foot

3/8" Nut (12)–5

(2)–12

(1)–4

Washer (11)–10

 

 

Spacer (85)–6

 

 

 

 

 

#8 x 1" Tek Screw

1/4" x 1/2"

3/8" x 3/4"

 

3/8" x 1"

3/8" x 1 1/4"

(4)–6

Bolt (3)–2

 

 

 

Bolt (10)–2

Patch Bolt (8)–2

Patch Bolt (9)–4

3/8" x 2" Bolt (6)–3

 

 

3/8" x 2 3/4" Bolt (7)–4

 

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents QUESTIONS? Model No. GGTL10109.0 Serial NoTable of Contents Important Precautions Page Before YOU Begin Assembly Completely assembled Make sure that the power cord is unpluggedNot fully fold the Frame until the treadmill is Tek Screws 4 do not overtightenSee the inset drawing. Tie the wire tie Tighten the Bolts yetPulse Bar. See the inset drawing. The con Nectors should slide together easily113 Console Assembly Uprights. Be careful not to pinch any wires Patch Bolts before tightening any of themPage Page Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Console DiagramFeatures of the Console AudioHOW to Turn on the Power HOW to USE the Manual ModeDistance Follow your progress with the displays. The matrix-When youMeasure your heart rate if desired. Before using Turn on the fans if desiredHOW to USE a Speed Workout Select a speed workoutStart the walking belt HOW to Create a Custom Workout Select a custom workoutHOW to USE a Custom Workout HOW to USE AN Ifit Workout Insert an iFit card and select a workoutInformation Mode HOW to USE the Stereo Sound SystemMake sure that the audio wire is fully plugged HOW to Fold and Move the Treadmill HOW to Move the TreadmillHOW to Lower the Treadmill for USE Important The treadmill is not TroubleshootingProblem The power turns off during use Compatible with GFCI-equipped outletsProblem The walking belt slows when walked on TopProblem Solution Walking belt is off-center or slips when walked onWorkout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencyPart LIST-Model No. GGTL10109.0 Key No. Qty DescriptionQty GGTL10109.0 Exploded Drawing B-Model No. GGTL10109.0 R0909A Exploded Drawing C-Model No. GGTL10109.0 R0909A Exploded Drawing D-Model No. GGTL10109.0 R0909A Exploded Drawing E-Model No. GGTL10109.0 R0909A Ordering Replacement Parts Limited WarrantyIcon Health & Fitness, Inc., 1500 S W., Logan, UT
Top Page Image Contents