Gold's Gym 685, GGTL58608.0 manual Problem Solution

Page 23

PROBLEM:

SOLUTION:

The walking belt is off-center or slips when walked on a. If the walking belt is off-center, first remove the key and UNPLUG THE POWER CORD. If the walking

belt has shifted to the left, use the hex key to turn the left rear roller bolt clockwise 1/2 of a turn; if the walking belt has shifted to the right, turn the left bolt counterclockwise 1/2 of a turn. Be careful not to overtighten the walking belt. Then, plug in the power cord, insert the key, and run the treadmill for a few minutes. Repeat until the walking belt is centered.

b. If the walking belt slips when walked on, first re- move the key and UNPLUG THE POWER CORD. Using the hex key, turn both rear roller bolts clock- wise, 1/4 of a turn. When the walking belt is correctly tightened, you should be able to lift each edge of the walking belt 2 to 3 in. (5 to 8 cm) above the walking platform. Be careful to keep the walking belt centered. Then, plug in the power cord, insert the key, and care- fully walk on the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

a

b

23

Image 23

Contents Model No. GGTL58608.0 Serial No QUESTIONS?Table of Contents Important Precautions Page Before YOU Begin Fully tighten the Upright Bolts yet AssemblyMake sure that the power cord is unplugged Upright do not fully tighten the Upright Bolts Yet Tighten the Bolts yet See steps 2 and 4. Fully tighten the twoEndcap Screws Not Connected PROPERLY, the CON Sole MAY be Damaged When Page PRE-LUBRICATED Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Features of the Console Console DiagramHOW to USE the Manual Mode HOW to Turn on the PowerTurn on the fan if desired Measure your heart rate if desiredPrograms HOW to USE a Personal Trainer QuickProgram Select one of the personal trainer quickSelect a custom quick program HOW to Create Your OWN Quick ProgramFollow your progress with the matrix and the displays Select a custom quick programs HOW to USE Your OWN Quick ProgramInformation Mode HOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Lower the Treadmill for USE Problem The power turns off during use TroubleshootingTop Problem The walking belt slows when walked onProblem Solution Exercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesSuggested Stretches Key No. Qty. Description R1108AKey No. Qty Description Exploded Drawing A-Model No. GGTL58608.0 R1108A Exploded Drawing B-Model No. GGTL58608.0 R1108A Exploded Drawing C-Model No. GGTL58608.0 R1108A Exploded Drawing D-Model No. GGTL58608.0 R1108A Icon Health & Fitness, Inc., 1500 S W., Logan, UT Ordering Replacement PartsLimited Warranty