Healthrider HRTL11940 manual HOW to Connect Your Home Stereo, HOW to Connect Your Computer

Page 16

HOW TO CONNECT YOUR HOME STEREO

Note: If your stereo has an unused LINE OUT jack, see instruction A below. If the LINE OUT jack is being used, see instruction B.

A. Plug one end of the audio cable into the jack on the front of the treadmill near the power cord. Plug the other end of the cable into the included adapter. Plug the adapter into the LINE OUT jack on your stereo.

A

CD

 

 

 

 

VCR

 

 

Amp

LINE OUT

 

LINE OUT

Audio

Adapter

 

Cable

 

 

B. Plug one end of the audio cable into the jack on the front of the treadmill near the power cord. Plug the other end of the cable into the included adapter. Plug the adapter into an RCA Y-adapter (available at electronics stores). Next, remove the wire that is currently plugged into the LINE OUT jack on your stereo and plug the wire into the unused side of the Y-adapter. Plug the Y-adapter into the LINE OUT jack on your stereo.

B

CD

 

 

 

 

VCR

 

 

Amp

LINE OUT

Audio

RCA Y-adapter

Adapter

 

Cable

 

Wire removed from

 

LINE OUT jack

 

HOW TO CONNECT YOUR COMPUTER

Note: If your computer has a 3.5mm LINE OUT jack, see instruction A. If your computer has only a PHONES jack, see instruction B.

A. Plug one end of the audio cable into the jack on the front of the treadmill near the power cord. Plug the other end of the cable into the LINE OUT jack on your computer.

A

LINE OUT

Audio

Cable

B. Plug one end of the audio cable into the jack on the front of the treadmill near the power cord. Plug the other end of the cable into a 3.5mm Y-adapter (available at electronics stores). Plug the Y-adapter into the PHONES jack on your computer. Plug your headphones or speakers into the other side of the Y-adapter.

B

 

 

PHONES

Audio

3.5mm

Cable

Y-adapter

Headphones/Speakers

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents
Model No. HRTL11940 Serial No QUESTIONS?Customer HOT Line Table of Contents Important Precautions Page Back Before YOU BeginRight Side Assembly Uprights 65 as shown, with the Bumpers 98 under Make sure that no wires are pinched. See aboveTurn the receiver B so the cylinder is on the side Treadmill Operation HOW to Plug in the Power CordPerformant Lubetm Walking Belt Features of the Console HOW to Turn on the Power HOW to USE the Manual ModeContacts.Avoid moving your hands. When your When you are finished exercising, removeAdjust the incline of the treadmill to the lowest Removed, the console is in the demo mode HOW to USE Preset Workout Programs Select one of the preset workout programsHOW to USE Heart Rate Programs Follow your progress with the displaysPut on the optional chest pulse sensor Select a heart rate programEnter your age and a maximum speed setting For the program HOW to Connect Your Portable Stereo HOW to Connect Your Home Stereo HOW to Connect Your ComputerHOW to Connect Your VCR Insert the key into the consolePress the Play button on your CD player or VCRWhenkey. the program is completed, remove HOW to USE Programs Directly from OUR WEB Site When the program has ended, remove the keyFollow the on-line instructions to start Program Return to the treadmill and stand on the footInformation MODE/DEMO Mode Optional Chest Pulse SensorHOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USE Troubleshooting ProblemsolutionWalking belt is off-center or slips when walked on Plug the Power CORD. Next, removeMagnet and the Reed Switch is about Displays of the console do not func- tion properlyExercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencyR1103A Qty DescriptionPart Identification Chart HOW to Order Replacement PartsUse the chart below to identify small parts during assembly HRTL11940 Exploded DRAWING-Model No. HRTL11940 Limited Warranty
Top Page Image Contents