Healthrider HRTL11940 manual HOW to Turn on the Power, HOW to USE the Manual Mode

Page 10

HOW TO TURN ON THE POWER

1 Plug in the power cord (see page 8).

2

Locate the circuit

 

 

 

breaker near the

 

 

 

 

Reset

 

 

 

 

 

power cord. Make

 

 

 

 

Position

 

 

sure the breaker is in

 

 

 

 

 

 

 

the reset position.

 

 

 

Stand on the foot rails of the treadmill. Find the clip

3 attached to the key (see the drawing on page 9)

and slide the clip onto the waistband of your clothes. Next, route the cord attached to the clip under the handgrip pulse sensor, and insert the key into the console. After a moment, the displays and various indicators will light. Test the clip by carefully taking a few steps backward until the key is pulled from the console. If the key is not pulled from the console, adjust the position of the clip.

HOW TO USE THE MANUAL MODE

1 Insert the key fully into the console.

See HOW TO TURN ON THE POWER above. Note: Be sure to route the cord attached to the clip under the handgrip pulse sensor.

2 Select the manual mode.

When the key is in- serted, the manual mode will be selected and the Manual Control indicator will light. If a program has been

selected, press the Program Select button repeat- edly to reselect the manual mode.

Press the Start button or the Speed ▲ button to

3 start the walking belt.

A moment after the but- ton is pressed, the

walking belt will begin to move at 1 mph. Hold the handrails and begin walking. As you exer-

cise, change the speed of the walking belt as de- sired by pressing the Speed ▼ and ▲ buttons.

Each time a button is pressed, the speed setting will change by 0.1 mph; if a button is held down, the speed setting will change in increments of 0.5 mph. To change the speed setting quickly, press the OneTouch Speed buttons. Note: The console can display speed and distance in either miles or kilometers. For simplicity, all instructions in this section refer to miles.

To stop the walking belt, press the Stop button. The Time/Segment Time/Pace display will begin to flash. To restart the walking belt, press the Start button or the Speed ▲ button.

Note: The first time the treadmill is used, observe the alignment of the walking belt, and align the walking belt if necessary (see page 24).

4 Change the incline of the treadmill as desired.

To change the incline of the treadmill, press the Incline buttons. Each time a button is pressed, the

incline will change by 0.5%. Note: After the but-

tons are pressed, it may take a moment for the treadmill to reach the selected incline setting.

Follow your progress with the LED matrix and

5 the displays.

The LED matrix—When the manual mode or the

iFIT.com mode is se- lected, the LED matrix will show a track repre- senting 1/4 mile. As you

exercise, the indicators

around the track will light, one at a time, until you have completed 1/4 mile. A new lap will then begin.

Time/Segment Time/

Pace display—When the manual mode or the iFIT.com mode is se-

lected, this display will show the elapsed time

and your current pace (pace is measured in min- utes per mile). The display will change from one number to the other every few seconds. When a preset program or a heart rate program is se- lected, the display will show the time remaining in the program, the time remaining in the current seg- ment of the program, and your current pace.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Model No. HRTL11940 Serial No QUESTIONS?Customer HOT Line Table of Contents Important Precautions Page Back Before YOU BeginRight Side Assembly Uprights 65 as shown, with the Bumpers 98 under Make sure that no wires are pinched. See aboveTurn the receiver B so the cylinder is on the side Treadmill Operation HOW to Plug in the Power CordPerformant Lubetm Walking Belt Features of the Console HOW to Turn on the Power HOW to USE the Manual ModeAdjust the incline of the treadmill to the lowest Contacts.Avoid moving your hands. When yourWhen you are finished exercising, remove Removed, the console is in the demo modeHOW to USE Preset Workout Programs Select one of the preset workout programsPut on the optional chest pulse sensor HOW to USE Heart Rate ProgramsFollow your progress with the displays Select a heart rate programEnter your age and a maximum speed setting For the program HOW to Connect Your Portable Stereo HOW to Connect Your Home Stereo HOW to Connect Your ComputerPress the Play button on your CD player or HOW to Connect Your VCRInsert the key into the console VCRWhenkey. the program is completed, remove Follow the on-line instructions to start Program HOW to USE Programs Directly from OUR WEB SiteWhen the program has ended, remove the key Return to the treadmill and stand on the footInformation MODE/DEMO Mode Optional Chest Pulse SensorHOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USE Troubleshooting ProblemsolutionMagnet and the Reed Switch is about Walking belt is off-center or slips when walked onPlug the Power CORD. Next, remove Displays of the console do not func- tion properlyWorkout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencyR1103A Qty DescriptionPart Identification Chart HOW to Order Replacement PartsUse the chart below to identify small parts during assembly HRTL11940 Exploded DRAWING-Model No. HRTL11940 Limited Warranty

HRTL11940 specifications

The Healthrider HRTL11940 is a sophisticated treadmill designed for both beginner and advanced fitness enthusiasts, offering a comprehensive approach to home workout routines. This model has been engineered to provide users with an effective cardiovascular workout while ensuring comfort and a variety of features to enhance the experience.

One of the standout features of the Healthrider HRTL11940 is its spacious running surface. With a generous tread belt size, users can enjoy a comfortable and secure running or walking experience. This treadmill is equipped with a robust motor, which powers the machine's performance, allowing for smooth speed transitions from walking to more vigorous jogging or running sessions.

Incorporating advanced technology, the HRTL11940 offers a variety of pre-programmed workouts designed to challenge users and keep their routines engaging. With multiple incline settings, individuals can simulate hill workouts, which increases workout intensity and engages different muscle groups. This adaptability allows users to tailor workouts to their fitness levels and goals, promoting effective weight loss and toning.

The treadmill features an easy-to-read LCD display that tracks essential workout metrics such as time, distance, speed, calories burned, and heart rate. Heart rate monitoring is facilitated through built-in sensors, enabling users to maintain their training within optimal heart rate zones for maximum effectiveness.

Comfort is another important aspect of the Healthrider HRTL11940. This model is designed with cushioning technology that reduces impact on joints while running, which is especially beneficial for those with prior injuries or sensitivities. This makes it an appealing choice for users who may be concerned about the stress high-impact workouts can place on their bodies.

Moreover, the HRTL11940 has built-in speakers and an audio jack, allowing users to connect their devices and listen to their favorite music or podcasts while exercising, enhancing motivation and enjoyment during workouts.

In summary, the Healthrider HRTL11940 combines a powerful motor, spacious running surface, multiple incline options, and advanced tracking technologies to create a versatile and user-friendly treadmill. Its focus on comfort, variety, and connectivity makes it an excellent choice for anyone looking to elevate their home fitness regime. Whether for a leisurely walk or an intense training session, this treadmill is equipped to meet diverse fitness needs and goals.
Top Page Image Contents