Healthrider H500i manual Information MODE/DEMO Mode, Optional Chest Pulse Sensor

Page 16

THE INFORMATION MODE/DEMO MODE

The console features an information mode that keeps track of treadmill usage information. The information mode also allows you to select miles or kilometers as the unit of measurement and to turn on and turn off the demo mode.

To select the information mode, hold down the Stop button, insert the key into the console, and then release the Stop button. When the information mode is se- lected, the following information will appear in the dis- play:

The center of the display will show the total number

of hours that the

treadmill has

been operated. The lower part of the display will show total num-

ber of miles or kilometers that the walking belt has moved. In addition, an “E” for English miles or an “M” for metric kilometers will appear in the lower part of the display. To change the unit of measurement, press the Speed increase button.

IMPORTANT: If a “d” appears in the display, the con- sole is in the “demo” mode. This mode is intended to be used only when a treadmill is displayed in a store. When the console is in the demo mode, the power cord can be plugged in, the key can be removed from the console, and the indicators in the display will automati- cally appear in a preset sequence; the buttons on the console will not operate. If a “d” appears when the in- formation mode is selected, press the Speed de- crease button so that the “d” disappears.

To exit the information mode, remove the key from the console.

THE OPTIONAL CHEST PULSE SENSOR

An optional chest pulse sensor offers hands-free oper- ation as it tracks your heart rate during your workouts.

To purchase the optional chest pulse sensor, call the toll-free telephone number on the front cover of this manual.

16

Image 16
Contents Model No. HRTL71706.0 Serial No QUESTIONS?Call TOLL-FREE Table of Contents Important Precautions Page Before YOU Begin For your benefit, read this manual carefully beforeRight Side BackAssembly Shaft at least 6 long and wire cuttersMake sure that the power cord is unplugged Extension leg. Firmly tighten the Extension Leg BoltsFrame 58 yet Connect the connectors properly see Connectors are not ConnectedBe careful to avoid pinching any of the wires Make sure that the ground wire see stepSmall Screws HOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to USE the Manual ModeTurn on the fan if desired Measure your heart rate if desiredWhenkey. you are finished exercising, remove HOW to USE a Cross Trainer Program Select one of the six cross trainer programsPerform the first strength exercise when Prompted Continue the cross trainer programInformation MODE/DEMO Mode Optional Chest Pulse SensorHOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useProblem The walking belt slows when walked on Top View Conditioning Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencyR0408A Qty DescriptionOrdering Replacement Parts Exploded Drawing A-Model No. HRTL71706.0 R0408A Exploded Drawing B-Model No. HRTL71706.0 R0408A Exploded Drawing C-Model No. HRTL71706.0 R0408A Exploded Drawing D-Model No. HRTL71706.0 R0408A Limited Warranty
Related manuals
Manual 28 pages 21.51 Kb