Smooth Fitness CE 7.4 user manual Step

14

SMOOTH CE 7.4 ELLIPTICAL TRAINER

ASSEMBLY

Step 6:

Attach the Accessory Tray Bracket (96) to Handrail – Left (7) and Handrail – Right (8) with two M6 x 12mm Screw (105) as shown in FIG.11.

Connect the Wire Harness – Top (109) to the Wire Harness – Upper (111) and the Hand Pulse Sensor Wires – Top (116) to the Hand Pulse Sensor Wires – Upper (117) as shown in FIG.12.

Attach the Console Housing (1) to the Handrail – Left (7) and Handrail – Right (8). First fit the fringe of Accessory Tray (45) to the Rubber Ring (44) on the Handrail – Left (7) and Handrail – Right (8). Then secure the Accessory Tray Bracket (96) to the Accessory Tray (45) with two M6 x 15mm Bolt (77) and two M6 Nylon Nut (86) as shown in FIG.13. Then secure the Console Housing (1) using two M6 x 20mm Screws (104) as shown in FIG.14.

NOTE: Make sure all wires are recessed into the Console Housing, do not trap or pinch any of the wires.

109

116

116

111

117

117

77

7

				45	1
86					116
					109
44	96	44	8	8	117

Fig 13	111
	7
	44

Fig 12

Fig 11

78

105 96

1

7

104

Fig 14

Visit us at: www.smoothfitness.com