Pentax R-322(N), R-325(N), R-335(N) Backsight Selection a. Coordinates input, Coordinates Input

Page 18

PSF Software Ver.365

Confirm the called STATION P. COORDINATES and then press the [ENT] key.

When the INSTR. H. change is needed, change the height value, and press the [ENT] key to view the BACKSIGHT SELECTION screen.

BACKSIGHT SELECTION

1.COORDINATES INPUT 2.FORESIGHT COORD.(AZIMUTH)

INPUT

(2)Backsight Selection a. Coordinates input

The Backsight Point Number and Coordinates input

BACKSIGHT SELECTION

1. COORDINATES INPUT

2.FORESIGHT COORD.(AZIMUTH) INPUT

BACKSIGHT NUMBER LIST

Push the [ENT] key at

1. 0000

"1.COORDINATES INPUT".

BACKSIGHT NUMBER LIST screen is

viewed.

POINT NUMBER

Press the [ENT] key to view the POINT

0025

NUMBER screen.

Input the Backsight point number

according to the STATION P.NUMBER

input.

CLEAR

Press the [ENT] key to view the BACKSIGHT

COORDONATES INPUT screen.

Image 18

Contents Special Functions PSF Software Ver.365 Document VerCopyright ENT PowerESC HelpDisp MeasTarget ModeRelations between memories and each Special function Contents Resection DataLink DL- 01 SoftwareIntroduction IntroductionAccessing the Special Functions Example COORD. StakeoutCOORD.STAKEOUT can be Accessing by Help KEY Accessing the Special Functions000 109COORD. Stakeout General pictures of measurementJOB Name input Alphanumeric keys and arrow keyJOB Name selection Station Coordinates Station Coordinates input Number List screenNumber screen Coordinates Input screen Input the Y and Z CoordinateStation Coordinate which is Search and call of the stored Station Coordinates Backsight Selection screen is viewedENT key to view the Instrument Height Input screen Backsight Selection a. Coordinates input Coordinates InputNumber screen Input the Backsight point number Backsight Point Number Search and Call of the stored Backsight Point NumberForesight Number List screen after Confirm the Backsight Point CoordinatesProcedures 2 of 3. Stakeout Input and Stakeout of Foresight Point Number and CoordinatesCompare screen Input the Foresight point numberInput the Foresight point Coordinates Aim at the Backsight point and input Azimuth angle in caseRotate the instrument horizontally and stop Search and Call of the stored Foresight Point Number Distance Stakeout ENT Dist Compare Distance StakeoutDistance Stakeout ENT Track / MeasReference Point RDMREF.P-P REF.P.-PObservation of the reference point Observation of the target point P1Coordinates JOB Name ENT Coordinate JOB Name InputJOB Name ENT Coordinates JOB Name Input Search and call of stored Station Coordinates Search and call of the stored Backsight P. Number Azimuth inputMeasured Point ENT Description Select Description Input Prism HStore / ENT Offset Point Offset ShotsH are offset value ObstacleJOB Name input Selection keys JOB Name selection Selection keys , ⇒Coordinates Input ENT Coordinates input Backsight Coordinates inputSearch and call of the stored Backsight Coordinates Select Description Input ENT CoordinateOffset point survey Target point surveyObserving the target REMObserving the reference point ENT Input Prism HStored JOB Name selection Selection keys , ⇒ ResectionJOB Name input Selection keys , ⇒ ENT Station Point InputPoint B survey Point C survey Prism H Select Description Select Resection Descriptioninput ENT ENT YSelect ENT Prism H Select ENTJOB Name ENT Survey JOB Name Input Data StorageJOB Name selection Selection keys ∆ , ∇ JOB Name ENT Survey JOB NameENT INSTR. H Station Setup ENT Station Point InputENT Description Select ENT Store SelectMemory Manager Send by input of the stored Coordinates JOB NameSelect Baud Rate Memory ManagerShift to a desired JOB Name ENT ReceiveDelete by input of the Coordinates JOB Name Delete by search of the Coordinates JOB NameSend by input of the Survey JOB Name Search & shift to stored JOB NameSurvey Data Send ENT Send by search & call of the Survey JOB Name ENT Over Write Delete by input and call of the Survey JOB NameDelete by search and call of the Survey JOB Name Memory Manager ENTDataLink DL- 01 Software Recommended communication settings on DL-01 PN,X,Y,Z,Code Mail international@piic.pentax.co.jp First edition TS01101EB2