Pentax R-325(N), R-335(N), R-323(N), R-322(N), R326 Recommended communication settings on DL-01

Page 50

PSF Software Ver.365

6.XON/XOFF: OFF

Please note that these settings should be common with DL-01's.

b-4 Recommended communication settings on DL-01

To configure DL-01 Communication setting, please read "Configuring the software" in the Help topics of DL-01. And select values as follows.

For setting “Type of Device” in the "Settings" panel (Menu—“Edit”--”Settings”),

select “PCS-300/R-100(PCS)/R-300(PSF)” for “R-300 PentaxSpecificationFunction” and other setting should be as follows.

(Please note that these settings should be common with Ｒ-300's. And if the selection of “Type of Device” is not collect it may result in missing some data.)

R-300BPC(DL-01)
Bits per second:	1200 (1200-9600 for sending "SURVEY DATA")
Databits:	8
Parity:	None
Stop bits:	1
PC(DL-01)BＲ-300
Bits per second:	1200
Databits:	8
Parity:	None
Stop bits:	1

c) Note for the Memory capacity

Data transfer failure from DL01 to R-300 may cause reduction of memory capacity. If memory capacity becomes less, please back up required data first, and then initialize coordinates data. To initialize coordinates data, turn on the instrument while pressing [F2]+[F5]+[ON/OFF] keys, and take your finger off from [ON/OFF] again.

After you see the message "COORD. DATA INITIAL", press [F5] key. Then the message "Please,

wait" is displayed. When it is completed, the panel of Electronic Vial is displayed.

49

Image 50

Contents Special Functions PSF Software Ver.365 Document VerCopyright ENT PowerESC HelpDisp MeasTarget ModeRelations between memories and each Special function Contents Resection DataLink DL- 01 SoftwareIntroduction IntroductionCOORD.STAKEOUT can be Accessing the Special FunctionsExample COORD. Stakeout Accessing by Help KEY Accessing the Special Functions000 109COORD. Stakeout General pictures of measurementJOB Name input Alphanumeric keys and arrow keyJOB Name selection Number screen Station Coordinates Station Coordinates inputNumber List screen Station Coordinate which is Coordinates Input screenInput the Y and Z Coordinate ENT key to view the Instrument Height Input screen Search and call of the stored Station CoordinatesBacksight Selection screen is viewed Number screen Input the Backsight point number Backsight Selection a. Coordinates inputCoordinates Input Backsight Point Number Search and Call of the stored Backsight Point NumberForesight Number List screen after Confirm the Backsight Point CoordinatesProcedures 2 of 3. Stakeout Input and Stakeout of Foresight Point Number and CoordinatesCompare screen Input the Foresight point numberInput the Foresight point Coordinates Aim at the Backsight point and input Azimuth angle in caseRotate the instrument horizontally and stop Search and Call of the stored Foresight Point Number Distance Stakeout ENT Dist Compare Distance StakeoutDistance Stakeout ENT Track / MeasReference Point RDMREF.P-P REF.P.-PObservation of the reference point Observation of the target point P1JOB Name ENT Coordinates JOB Name Input CoordinatesJOB Name ENT Coordinate JOB Name Input Search and call of stored Station Coordinates Search and call of the stored Backsight P. Number Azimuth inputStore / ENT Measured PointENT Description Select Description Input Prism H Offset Point Offset ShotsH are offset value ObstacleJOB Name input Selection keys JOB Name selection Selection keys , ⇒Coordinates Input ENT Coordinates input Backsight Coordinates inputSearch and call of the stored Backsight Coordinates Select Description Input ENT CoordinateOffset point survey Target point surveyObserving the target REMObserving the reference point ENT Input Prism HStored JOB Name selection Selection keys , ⇒ ResectionJOB Name input Selection keys , ⇒ ENT Station Point InputPoint B survey Point C survey Prism H Select Description Select Resection Descriptioninput ENT ENT YSelect ENT Prism H Select ENTJOB Name ENT Survey JOB Name Input Data StorageJOB Name selection Selection keys ∆ , ∇ JOB Name ENT Survey JOB NameENT INSTR. H Station Setup ENT Station Point InputENT Description Select ENT Store SelectMemory Manager Send by input of the stored Coordinates JOB NameSelect Baud Rate Memory ManagerShift to a desired JOB Name ENT ReceiveDelete by input of the Coordinates JOB Name Delete by search of the Coordinates JOB NameSurvey Data Send ENT Send by input of the Survey JOB NameSearch & shift to stored JOB Name Send by search & call of the Survey JOB Name ENT Over Write Delete by input and call of the Survey JOB NameDelete by search and call of the Survey JOB Name Memory Manager ENTDataLink DL- 01 Software Recommended communication settings on DL-01 PN,X,Y,Z,Code Mail international@piic.pentax.co.jp First edition TS01101EB2