Pentax R-325(N), R-335(N), R-323(N), R326 Distance Stakeout ENT, ENT Dist Compare, Track / Meas

Page 25

PSF Software Ver.365

4 DISTANCE STAKEOUT

Detailed Operating procedures

Access the DISTANCE STAKEOUT according to "1. ACCESSING THE SPECIAL FUNCTIONS".

Step 1 Selecting the distance to be displayed and inputting the design values.

(1)

DISTANCE STAKEOUT

ENT


		1 .H.dist.				SELECT				Input H.dist.

ENT				DIST COMPARE					To Step 2

*Input the S.dist. and V.dist. in the same way.

Step 2

(1)

STAKEOUT start

TRACK / MEAS

Move the prism to the ground point where the deviation is "0"

(2)

(3)

Use the ground point where the deviation is "0" as the STAKEOUT point

Use the [ENT] key to exit		Go back to
the STAKEOUT function		Step 1

If necessary,

repeat the measurement

Use the [ESC] key to exit the distance stake-out function

A prism can be easily tracked if a position is searched by using a [TRACK] function and then using a [MEAS] function.

24

Image 25

Contents Document Ver Special Functions PSF Software Ver.365Copyright ESC PowerENT HelpTarget MeasDisp ModeRelations between memories and each Special function Contents DataLink DL- 01 Software ResectionIntroduction IntroductionExample COORD. Stakeout Accessing the Special FunctionsCOORD.STAKEOUT can be Accessing the Special Functions Accessing by Help KEY109 000General pictures of measurement COORD. StakeoutAlphanumeric keys and arrow key JOB Name inputJOB Name selection Number List screen Station Coordinates Station Coordinates inputNumber screen Input the Y and Z Coordinate Coordinates Input screenStation Coordinate which is Backsight Selection screen is viewed Search and call of the stored Station CoordinatesENT key to view the Instrument Height Input screen Coordinates Input Backsight Selection a. Coordinates inputNumber screen Input the Backsight point number Foresight Number List screen after Search and Call of the stored Backsight Point NumberBacksight Point Number Confirm the Backsight Point CoordinatesInput and Stakeout of Foresight Point Number and Coordinates Procedures 2 of 3. StakeoutInput the Foresight point Coordinates Input the Foresight point numberCompare screen Aim at the Backsight point and input Azimuth angle in case Rotate the instrument horizontally and stop Search and Call of the stored Foresight Point Number Distance Stakeout Distance Stakeout ENT Distance StakeoutENT Dist Compare Track / MeasREF.P-P RDMReference Point REF.P.-PObservation of the target point P1 Observation of the reference pointJOB Name ENT Coordinate JOB Name Input CoordinatesJOB Name ENT Coordinates JOB Name Input Search and call of stored Station Coordinates Azimuth input Search and call of the stored Backsight P. NumberENT Description Select Description Input Prism H Measured PointStore / ENT H are offset value Offset ShotsOffset Point ObstacleJOB Name selection Selection keys , ⇒ JOB Name input Selection keysSearch and call of the stored Backsight Coordinates Coordinates input Backsight Coordinates inputCoordinates Input ENT Select Description Input ENT CoordinateTarget point survey Offset point surveyObserving the reference point REMObserving the target ENT Input Prism HJOB Name input Selection keys , ⇒ ResectionStored JOB Name selection Selection keys , ⇒ ENT Station Point InputPoint B survey Point C survey Select ENT Description Select Resection Descriptioninput ENT ENT YPrism H Select Prism H Select ENTJOB Name selection Selection keys ∆ , ∇ Data StorageJOB Name ENT Survey JOB Name Input JOB Name ENT Survey JOB NameENT Description Select Station Setup ENT Station Point InputENT INSTR. H ENT Store SelectSend by input of the stored Coordinates JOB Name Memory ManagerShift to a desired JOB Name Memory ManagerSelect Baud Rate ENT ReceiveDelete by search of the Coordinates JOB Name Delete by input of the Coordinates JOB NameSearch & shift to stored JOB Name Send by input of the Survey JOB NameSurvey Data Send ENT Send by search & call of the Survey JOB Name Delete by search and call of the Survey JOB Name Delete by input and call of the Survey JOB NameENT Over Write Memory Manager ENTDataLink DL- 01 Software Recommended communication settings on DL-01 PN,X,Y,Z,Code First edition TS01101EB2 Mail international@piic.pentax.co.jp