Pentax R-322(N), R-325(N), R-335(N), R-323(N) Search and Call of the stored Foresight Point Number

Page 23

PSF Software Ver.365

At the procedure 6, the 00" of the DEVIATE.value can be easily got if the minimum count is set to 1 ".

At the procedure 8, a prism can be easily tracked if a position is searched using the [TRACK] function and then using the [MEAS] function.

(2) Search and Call of the stored Foresight Point Number

1

Move the cursor to 3. STAKEOUT

COORD.STAKEOUT

1. JOB NAME

2. STATION SET UP

3. STAKEOUT

2

Press the [ENT] key.		FORESIGHT NUMBER LIST

		1. 0000
		1. 0000
		2. 1234
	3. 0025

3

Search for the desired Foresight point number.

4

Confirm the called Foresight Coordinates and press [ENT] key. If the prism height change is necessary, press the [ENT] key after the change.

ANGLE COMPARE

DESIGN	90°	00'	00"
H.angle	0°	00'	00"
DEVIATE.	- 90°	00'	00"

H.INPUT0 SETANG/DIST

22

Image 23

Contents Document Ver Special Functions PSF Software Ver.365Copyright Help PowerESC ENTMode MeasTarget DispRelations between memories and each Special function Contents DataLink DL- 01 Software ResectionIntroduction IntroductionCOORD.STAKEOUT can be Accessing the Special FunctionsExample COORD. Stakeout Accessing the Special Functions Accessing by Help KEY109 000General pictures of measurement COORD. StakeoutAlphanumeric keys and arrow key JOB Name inputJOB Name selection Number screen Station Coordinates Station Coordinates inputNumber List screen Station Coordinate which is Coordinates Input screenInput the Y and Z Coordinate ENT key to view the Instrument Height Input screen Search and call of the stored Station CoordinatesBacksight Selection screen is viewed Number screen Input the Backsight point number Backsight Selection a. Coordinates inputCoordinates Input Confirm the Backsight Point Coordinates Search and Call of the stored Backsight Point NumberForesight Number List screen after Backsight Point NumberInput and Stakeout of Foresight Point Number and Coordinates Procedures 2 of 3. StakeoutAim at the Backsight point and input Azimuth angle in case Input the Foresight point numberInput the Foresight point Coordinates Compare screenRotate the instrument horizontally and stop Search and Call of the stored Foresight Point Number Distance Stakeout Track / Meas Distance StakeoutDistance Stakeout ENT ENT Dist CompareREF.P.-P RDMREF.P-P Reference PointObservation of the target point P1 Observation of the reference pointJOB Name ENT Coordinates JOB Name Input CoordinatesJOB Name ENT Coordinate JOB Name Input Search and call of stored Station Coordinates Azimuth input Search and call of the stored Backsight P. NumberStore / ENT Measured PointENT Description Select Description Input Prism H Obstacle Offset ShotsH are offset value Offset PointJOB Name selection Selection keys , ⇒ JOB Name input Selection keysSelect Description Input ENT Coordinate Coordinates input Backsight Coordinates inputSearch and call of the stored Backsight Coordinates Coordinates Input ENTTarget point survey Offset point surveyENT Input Prism H REMObserving the reference point Observing the targetENT Station Point Input ResectionJOB Name input Selection keys , ⇒ Stored JOB Name selection Selection keys , ⇒Point B survey Point C survey Prism H Select ENT Description Select Resection Descriptioninput ENT ENT YSelect ENT Prism H SelectJOB Name ENT Survey JOB Name Data StorageJOB Name selection Selection keys ∆ , ∇ JOB Name ENT Survey JOB Name InputENT Store Select Station Setup ENT Station Point InputENT Description Select ENT INSTR. HSend by input of the stored Coordinates JOB Name Memory ManagerENT Receive Memory ManagerShift to a desired JOB Name Select Baud RateDelete by search of the Coordinates JOB Name Delete by input of the Coordinates JOB NameSurvey Data Send ENT Send by input of the Survey JOB NameSearch & shift to stored JOB Name Send by search & call of the Survey JOB Name Memory Manager ENT Delete by input and call of the Survey JOB NameDelete by search and call of the Survey JOB Name ENT Over WriteDataLink DL- 01 Software Recommended communication settings on DL-01 PN,X,Y,Z,Code First edition TS01101EB2 Mail international@piic.pentax.co.jp