NordicTrack NTTL09993 Trouble-Shooting, Problem The power turns off during use, Top View

Page 23

TROUBLE-SHOOTING

Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call our Customer Service Department toll- free at 1-888-825-2588, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays).

PROBLEM: The power does not turn on

SOLUTION: a. Make sure that the power cord is plugged into a surge protector, and that the surge protector is plugged into a properly grounded outlet. (See HOW TO PLUG IN THE POWER CORD on page 8.) Use only a UL-listed surge protector, rated at 15 amps, with a 14-gauge cord of five feet or less in length. Important: The treadmill is not compatible with GFCI-equipped outlets.

b. After the power cord has been plugged in, make sure that the key is fully inserted into the console.

c. Check the circuit breaker located on the treadmill near the power cord. If the switch protrudes as shown, the circuit breaker has tripped. To reset the circuit breaker, wait for five minutes and then press the switch back in.

d. Check the on/off switch located on the treadmill near the power cord. The switch must be in the on position.

PROBLEM: The power turns off during use

c

 

Tripped

Reset

d

 

On

 

Position

 

SOLUTION: a. Check the circuit breaker located on the treadmill frame near the power cord (see c. above). If the

circuit breaker has tripped, wait for five minutes and then press the switch back in.

b. Make sure that the power cord is plugged in.

c. Remove the key from the console. Reinsert the key fully into the console.

d. Make sure that the on/off switch is in the on position.

e. If the treadmill still will not run, please call our Customer Service Department, toll-free.

PROBLEM: The displays of the console do not function properly

SOLUTION: a. Remove the key from the console and unplug the power cord. Carefully tip the treadmill down as shown in drawing a. Remove the Screws (39, 83) from the hood. Raise the Uprights (69) and carefully remove the hood.

b. Locate the Reed Switch (10) and the Magnet (7) on the left side of the Pulley (8). Turn the Pulley until the Magnet is aligned with the Reed Switch. Make sure that the gap between the Magnet and the Reed Switch is about 1/8Ó. If necessary, loosen the Screw

(111)and move the Reed Switch slightly. Retighten the Screw. Re-attach the hood, and run the treadmill for a few minutes to check for a correct speed reading.

a

 

 

39

69

83

 

b

 

1/8Ó

8

111

 

10

7

Top

 

View

 

23

Image 23
Contents Customer HOT Line QUESTIONS?Model No. NTTL09993 Serial No Table of Contents Important Precautions Page Right Side Before YOU BeginLeft Side Extension Legs 102 remain in the Uprights AssemblyYour own phillips screwdriver and wire cutters Do not tighten the Bolts yet Performant Lubetm Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Features of the Console Getting Started HOW to USE the Manual Mode Walking belt and remove the key HOW to USE Preset ProgramsSelect one of the three preset programs Measure your heart rate, if desiredFollow your progress with the displays When the program has ended, remove the keyHOW to Create Custom Programs HOW to USE Custom Programs HOW to Connect Your Portable Stereo HOW to Connect Your Computer HOW to Connect Your Home StereoHOW to Connect Your VCR Whenkey. the program is completed, remove Follow your progress with the LED track and the displaysSelect a program HOW to USE Programs Directly from OUR Internet SiteGo to your computer and start an internet Connection Start your web browser, if necessaryOptional Chest Pulse Sensor Information MODE/DEMO ModeOptional Hand Weights Important The Heart Rate/Calories displayHOW to Lower the Treadmill for USE HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Move the TreadmillTop View TROUBLE-SHOOTINGProblem The power turns off during use 3ÓÐ4Ó Problem The walking belt slows when walked onWorkout Guidelines Conditioning GuidelinesExercise Intensity Qty Description Part LISTÑModel No. NTTL09993Ordering Replacement Parts Exploded DRAWINGÑModel No. NTTL09993 Exploded DRAWINGÑModel No. NTTL09993 Limited Warranty

NTTL09993 specifications

The NordicTrack NTTL09993 is a cutting-edge treadmill designed for home fitness enthusiasts seeking an efficient and enjoyable workout experience. This state-of-the-art machine incorporates the latest innovations in fitness technology, making it an essential addition to any home gym.

One of the standout features of the NTTL09993 is its powerful and quiet motor, which provides a smooth and consistent running experience. With a top speed of 12 mph, users can easily adjust their pace to accommodate various workout goals, whether it be walking, jogging, or sprinting. The motor is also designed for durability, ensuring that the treadmill can withstand intense usage without compromising performance.

Another impressive aspect of the NordicTrack NTTL09993 is its spacious running surface. Measuring 20 inches wide by 60 inches long, the belt offers ample space for users of all sizes to exercise comfortably and safely. This design feature allows for both longer strides and stability, making it ideal for runners and walkers alike.

The treadmill is equipped with an adjustable incline feature that ranges from 0% to 12%. This allows users to simulate challenging terrains and add intensity to their workouts. The incline can be easily adjusted with the touch of a button, making it convenient for users to switch between flat and steep terrains seamlessly.

The NTTL09993 also features an impressive array of built-in workout programs. With over 50 preloaded workouts led by certified personal trainers, users have a variety of options to choose from, catering to different fitness levels and goals. These programs are designed to keep workouts engaging and challenging, allowing users to continuously progress in their fitness journey.

One of the key technologies in the NordicTrack NTTL09993 treadmill is its interactive iFit integration. Users can connect the treadmill to the iFit app, allowing for real-time tracking of workout data, custom workout plans, and access to a vast library of virtual workouts led by trainers in picturesque locations worldwide. This feature enhances the workout experience, making it more immersive and motivating.

The treadmill also includes convenient features such as built-in Bluetooth speakers, tablet holders, and easy-to-reach controls. These elements are designed to enhance user experience, allowing for multitasking during workouts and keeping users entertained.

In conclusion, the NordicTrack NTTL09993 treadmill stands out in the market due to its powerful motor, spacious running surface, adjustable incline, diverse workout programs, and integration with iFit technology. It offers everything fitness enthusiasts need to achieve their goals from the comfort of their homes.