Do not tighten the Bolts yet | NordicTrack NTTL09993 specification

4.Place one of the Handrail Spacers (65) on the right Upright (69) as shown, with the cutout turned toward the treadmill (see inset drawing A). Pull the Upright Wire Harness (98) up through the Handrail Spacer. Place the other Handrail Spacer on the left Upright (not shown).

Have a second person hold the Handrails (66) near the Uprights (69) as shown. Connect the Upright Wire Harness (98) to the wires extending from the right Handrail. Insert the connectors and the Wire Harness

(98)into the hole in the Console Base (81) (see inset drawing B).

Be careful not to pinch the Wire Harness (98) as you set the Handrails (66) on the Spacers (65).

5.Insert two Handrail Bushings (75) into the right Upright (69). Turn the Handrail Bushings so they fit against the Upright with the thick sides of the Bushings facing the center of the treadmill as shown in the inset drawing.

Insert two Handrail Bolts (78) with Handrail Washers

(77)into the Handrail Bushings (75), the right Upright (69), and the right Handrail Spacer (65). Lift up the right Handrail (66) to align the Bolts with the holes in the Handrail. Next, thread the Bolts into the Handrail (66).

Do not tighten the Bolts yet.

Attach the left Handrail (not shown) in the same way. Tighten all four Handrail Bolts (78).

6.Look at the Endcap (58). If the left or right foot on the Endcap does not touch the floor, the included thick base pads should be attached to the treadmill as de- scribed below.

Refer to assembly step 3. Lower the treadmill frame and the Uprights (69) as shown. If the left foot of the Endcap (58) was off the ground, remove the two Base Pads (99) from the right Upright (69). Attach the in- cluded thick base pads to the Upright. If the right side of the Endcap was off the ground, attach the thick base pads to the left Upright.

Note: If either side of the Endcap (58) lifts off the floor when the treadmill is used, attach the thick base pads as described.

4	Cutout	A
	81
	66			69
				69
				65
	98 69	B	98
	65
				81
5
		66
	65
		69
		75
			77	Thick
			77	Side
				Side
	75
	77		78
6
Left
Foot	58
	58
				Right
				Foot

7.Make sure that all parts are tightened before you use the treadmill. Note: If there is a thin sheet of clear plastic on the hood decal or the ÒComforTrackÓ decal, remove it. Keep the included allen wrench in a secure place. The allen wrench is used to adjust the walking belt (see page 24). To protect the floor or carpet from damage, place a mat under the treadmill.

NTTL09993 specifications

The NordicTrack NTTL09993 is a cutting-edge treadmill designed for home fitness enthusiasts seeking an efficient and enjoyable workout experience. This state-of-the-art machine incorporates the latest innovations in fitness technology, making it an essential addition to any home gym.

One of the standout features of the NTTL09993 is its powerful and quiet motor, which provides a smooth and consistent running experience. With a top speed of 12 mph, users can easily adjust their pace to accommodate various workout goals, whether it be walking, jogging, or sprinting. The motor is also designed for durability, ensuring that the treadmill can withstand intense usage without compromising performance.

Another impressive aspect of the NordicTrack NTTL09993 is its spacious running surface. Measuring 20 inches wide by 60 inches long, the belt offers ample space for users of all sizes to exercise comfortably and safely. This design feature allows for both longer strides and stability, making it ideal for runners and walkers alike.

The treadmill is equipped with an adjustable incline feature that ranges from 0% to 12%. This allows users to simulate challenging terrains and add intensity to their workouts. The incline can be easily adjusted with the touch of a button, making it convenient for users to switch between flat and steep terrains seamlessly.

The NTTL09993 also features an impressive array of built-in workout programs. With over 50 preloaded workouts led by certified personal trainers, users have a variety of options to choose from, catering to different fitness levels and goals. These programs are designed to keep workouts engaging and challenging, allowing users to continuously progress in their fitness journey.

One of the key technologies in the NordicTrack NTTL09993 treadmill is its interactive iFit integration. Users can connect the treadmill to the iFit app, allowing for real-time tracking of workout data, custom workout plans, and access to a vast library of virtual workouts led by trainers in picturesque locations worldwide. This feature enhances the workout experience, making it more immersive and motivating.

The treadmill also includes convenient features such as built-in Bluetooth speakers, tablet holders, and easy-to-reach controls. These elements are designed to enhance user experience, allowing for multitasking during workouts and keeping users entertained.

In conclusion, the NordicTrack NTTL09993 treadmill stands out in the market due to its powerful motor, spacious running surface, adjustable incline, diverse workout programs, and integration with iFit technology. It offers everything fitness enthusiasts need to achieve their goals from the comfort of their homes.