6.Tighten the two Carriage Tubes (11) into the holes in the Carriage (6).
Slide a Shoulder Block (10) onto each Carriage Tube (11).
7.Pull the Adjustment Knob (17) out of the Inner Frame (2). Slide the Inner Frame out of the Outer Frame (1) and engage the Knob into the adjust- ment hole in the Inner Frame.
Slide the Carriage (6) to the indicated end of the exercise bench.
8.Reach under the Carriage (6) and insert an M10 x 50mm Carriage Bolt (41) through the indicated hole in the Outer Frame (1).
Tighten a Cap Leg (14) onto the M10 x 50mm Carriage Bolt (41).
6 | 10 |
| |
| 11 |
| 11 |
| 6 |
7 |
|
| 6 |
| 1 |
| 17 |
| 2 |
8 |
|
| 41 |
| 6 |
| 1 |
| 14 |
6