03/7/21 IM-DR400E_6.fm
46
IM-DR400E
IM-DR400E TINSE0562AWZZ
References

-Error Messages-

Error Messages
A number or symbol appears in (*) position.
ERROR
MESSAGES MEANING
BATT EMPTY "The battery has run down.
BLANK MD "Nothing is recorded.
(Replace the disc with a recorded disc.)
Can't COPY "You tried to record from a copy pro-
hibited MiniDisc.
(Record using the analogue cable.)
"You tried to record signals other than
music (such as data).
Can't EDIT "A track cannot be edited.
(Change the stop position of the track
and then edit it.)
Can't LOCK "You tried to remove the MD whilst re-
cording or editing.
Can't PLAY "You tried to play back a track that
cannot be played with this equip-
ment.
Can't READ
(*)
"The disc data cannot be read be-
cause the disc is damaged.
(Reload the Minidisc or replace it with
another one.)
Can't REC "Recording cannot be performed cor-
rectly due to vibration or shock.
ERROR
MESSAGES MEANING
Can'tSTAMP "Stamp function does not work.
(Check the number of tracks.)
Can'tWRITE "Cannot save the TOC information
correctly to a MiniDisc.
DEFECT! "The disc is scratched.
(If the recorded sound is not right, retry
recording or replace the disc with a re-
cordable one.)
DISC FULL "The disc is out of recording space.
Er-MD (**) "The microprocessor has reported a
system fault and the unit is out of or-
der.
(To have it repaired, go to the distributor
where you purchased the unit.)
HOLD "The unit is in the hold mode.
LOCKED "You removed a MiniDisc whilst re-
cording or editing.
(Turn off the power before removing the
MiniDisc.)
NO DISC "A disc has not been loaded.