Sharp IM-DR400E Titling a MiniDisc (continued), 1, 2, 3, 4

03/7/21 IM-DR400E_5.fm
32
IM-DR400E
IM-DR400E TINSE0562AWZZ
Advanced Features
-Titling a MiniDisc-
Titling a MiniDisc (continued)
!To add characters !Stamping titles from another MiniDisc
Before stamping
When there are 2 MiniDiscs on which the same tracks
are recorded, you can transfer the character information
(disc and track names) of the master MiniDisc to another
MiniDisc (for stamping).
1Put the unit in the character input mode.
(Perform steps 1 - 5 on page 30.)
2Press the VOL + or VOL - button to move the
cursor to the character before which you
want to add a new character.
3Select the character to add.
(Perform steps 6 - 8 on page 30.)
4Press and hold down the MENU/ENTER but-
ton for 2 seconds or more.
""TOC" will be displayed. To write the updated con-
tents to the MiniDisc, press the :OFF/HOLD but-
ton.
"You cannot remove the MiniDisc whilst "TOC" is
displayed. "TOC" will not disappear until the re-
corded contents have been updated.
1. What is a master MiniDisc?
A recordable MiniDisc that contains tracks and charac-
ter information. (You cannot transfer the information
from a playback-only MiniDisc.)
2. What is a MiniDisc for stamping?
A MiniDisc that contains the same tracks in the same or-
der as the master MiniDisc. (Make sure that the total
number of tracks of the master MiniDisc and the one for
stamping are the same.)