Error Meaning Messages No Signal, Tr. Protect | Sharp IM-DR400E

ERROR	MEANING
MESSAGES

NO SIGNAL	" Poor connection of the digital cable.
	" No output signal comes out from the
	connected unit.
	(Use the AC power for the connected
	unit.)
	" The input signal has improper sam-
	pling frequency.

PLAY MD	" You tried to record on a playback-
	only disc.

POWER?	" AC adaptor other than specified.

PROTECTED	" The write protection tab of a MiniDisc
	is set to the protected position.

SORRY	" Since a track number is currently be-
	ing located or updated, the unit can-
	not accept your command.
	(Wait a while and try the operation
	again.)

ERROR	MEANING
MESSAGES

TEMP OVER	" The temperature is too high.
	(Turn off the power, and wait a while.)

TOC FORM	" There is an error in the recording sig-
(**)	nal.
	(Erase all of the tracks, and then record
	again.)

TOC FULL	" There is no space left for recording
	character information (track names,
	disc names, etc.).

Tr. Protect	" The track has been protected from
	being erased.
	(Edit the track with the device on which
	it was recorded.)

? DISC	" A disc which contains data other
	than music was played.
	(A disc which contains nonmusic data
	cannot be played.)
	" There is an error in the signal record-
	ed on the disc.

A number or symbol appears in (*) position.

IM-DR400E

References	-Error Messages-

8

6

5

4

3

2

1

IM-DR400E TINSE0562AWZZ

47

03/7/21 IM-DR400E_6.fm

Image 47

Sharp IM-DR400E operation manual Error Meaning Messages No Signal, Tr. Protect

Contents

IM-DR400E Special Notes Special Notes Important Introduction Pole plug earphone optimizes Mobile 1-bit digital amplifier FeaturesFeatures Portable MD player with Mobile 1-bit Digital amplifier Contents CD-ROM x AccessoriesAccessories Earphones x Main unit Names of Controls and IndicatorsImportant Introduction -Names of Controls and Indicators Reference TOC Indicator Track Number IndicatorDisplay panel Storing the unit PrecautionsPrecautions Avoid using or leaving the unit in the following places Do not use a nickel-cadmium battery Power Source -Using with the AC Adaptor/Alkaline BatteryClose the battery cover Close the compartment door Inserting a MiniDiscMiniDisc Connections IM-DR400EConnections Check before connecting Preparation -Hold Function To cancel the hold modeIM-DR400EHold Function Before Recording Helpful tip when attaching a labelBefore Recording About the TOC Before recording RecordingBasic Operation -Recording To stop recording Press the MENU/ENTER buttonTo interrupt recording To interrupt playback To turn off the powerPlayback Playback Basic Operation -Playback Volume controlBass control To customise low and high levels To locate the beginning of a track Useful Features -Advanced PlaybackAdvanced Playback To locate the desired portion Random Random play or repeat play Start recording Useful Features -Advanced RecordingAdvanced Recording Long-play recording LP4 About the recording modeIndication Recording mode About Atrac To interrupt recording Lect REC ModePlayback sound-actuated recording 12Begin playback on the stereo system Numbering restriction To create your own track numbersRecording tracks as a single track Useful -Advanced RecordingAbout track numbers About sampling rate converter Useful Features -Changing Default Settings Changing Default Settings To check the elapsed time and remain- ing time of the track IM-DR400EChecking Displays Checking the remaining amount of bat Tery level Useful Features -Checking DisplaysTo display the playing time of an indi- vidual track Enter button Titling a MiniDiscTitling a MiniDisc Creating disc and track names To enter a space Characters symbolsTo erase a character Stamping titles from another MiniDisc What is a master MiniDisc?What is a MiniDisc for stamping? To add characters TER button Master MiniDisc operation 1 Insert a master MiniDisc To erase all of the tracks at once Editing a Recorded MiniDiscEditing a Recorded MiniDisc To erase one track at a time Combined, and press the button To divide a trackTo combine tracks Start playing the track to be divided into two Play the track to be moved, and press To move a track Another Listening through Another SystemResuming auto play Net MD -About Net MD What is a Net MD portable recorder?About Net MD Restrictions on audio data Restrictions on check-in and check-out MB or more System RequirementsNet MD -System Requirements Hard disk space Click BeatJam Setup Software InstallationInstallation of BeatJam Net MD -Software Installation Net MD -Connecting to a PC IM-DR400EConnecting to a PC Windows Connecting to aChecking the USB driver Universal Serial Bus controllers Net MD -Transferring Data Transferring DataChecking out MiniDisc System Limitations MiniDisc System Limitations Error Messages Error Messages Tr. Protect Error Meaning Messages No Signal Troubleshooting Troubleshooting If trouble occurs MaintenanceCleaning Troubleshooting/Maintenance Specifications Specifications Output level Battery lifeInput sensitivity Sharp Corporation