Sharp IM-DR400E - page 33

33
IM-DR400E
1
2
3
4
5
6
03/7/21 IM-DR400E_5.fmIM-DR400E TINSE0562AWZZ
Advanced Features
-Titling a MiniDisc-
Master MiniDisc operation Operation of the MiniDisc for stamping
Note:
If the total number of tracks on the master MiniDisc does
not match that on the MiniDisc for stamping, the unit will
display "Can'tSTAMP" and turn off.
If this happens, adjust the total number of tracks on the
newly recorded MiniDisc using the edit operation.
1Insert a master MiniDisc.
Do not mistake the master MiniDisc for the target one.
2Whilst in the stop mode, press the MENU/
ENTER button.
3Press the or button repeatedly to se-
lect "EDIT".
4Press the MENU/ENTER button.
5Press the or but-
ton repeatedly to se-
lect "NAME STAMP".
6Press the MENU/EN-
TER button.
To cancel the operation, press the :OFF/HOLD but-
ton.
7Press the MENU/ENTER button.
8When the unit displays "CHANGE MD", re-
move the master MiniDisc.
Remove it without turning off the power. Or, the oper-
ation will be cancelled.
9Load a MiniDisc for stamping.
10Press the MENU/ENTER button.
The unit will finish recording the character information
and enter the stop mode.
6