Assembly

Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.

Assembly requires the included hex keys and your own phillips screwdriver			,
adjustable wrench	, and rubber mallet	.

As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses below each drawing is the key number of the part, from the PART LIST on pages 24 and 25. The number follow- ing the parentheses is the quantity needed for assembly. Note: Some small parts may have been preassem- bled. If a part is not in the parts bag, check to see if it has been preassembled.

Wave Washer	Large Wave	M8 Washer		M8 x 23mm x	M8 x 23mm x
(80)–2	Washer (89)–4		(95)–4	1mm Washer	2mm Washer
				(31)–4	(96)–8
M8 Split	M10 Split		M10 Nylon	M4 x 16mm	M8 x 14mm Button
M8 Split	M10 Split		M10 Nylon	Round Head	Screw (84)–6
Washer (97)–16	Washer (99)–2		Locknut (82)–2	Round Head	Screw (84)–6
Washer (97)–16	Washer (99)–2		Locknut (82)–2	Screw (78)–27
				Screw (78)–27
M8 x 19mm Button	M8 x 23mm Button			M10 x 78mm Carriage Bolt (92)–2
Screw (85)–6	Screw (86)–4
M8 x 45mm Button			M10 x 80mm Button Screw (93)–2
Screw (90)–6

1.See HOW TO FOLD AND UNFOLD THE ELLIPTICAL EXERCISER on page 11 and unfold the elliptical exerciser.

While another person lifts the front of the Frame (1), attach the Front Stabilizer (4) to the Frame with two M10 x 78mm Carriage

Bolts (92) and two M10 Nylon Locknuts (82).