To damage the Upper Wire Harness | NordicTrack NTEL7506.1 specification

5. Orient the Left and Right Upright Covers (19, 20)	5
as shown. Then, attach the Upright Covers	5
as shown. Then, attach the Upright Covers
around the Upright (10) with five M4 x 16mm
Round Head Screws (78).				78
				78
	78		20
	78		10
			10
	78	19
6. Apply a generous amount of the included grease	6
to the Upper Body Axle (71). Insert the Upper	6
to the Upper Body Axle (71). Insert the Upper			65
Body Axle into the Upright (10). Be careful not			65	96	85
to damage the Upper Wire Harness (65).			Grease	96	85
to damage the Upper Wire Harness (65).			Grease
Apply a small amount of grease to a Wave			71
Washer (80). Slide the Wave Washer onto the left		10	71
Washer (80). Slide the Wave Washer onto the left
end of the Upper Body Axle (71).
end of the Upper Body Axle (71).	Grease		80	72
	Grease		80	72
Identify the Left Upper Body Leg (24), which is
marked with a sticker, and orient it as shown.	96
Slide the Left Upper Body Leg onto the left side	96
Slide the Left Upper Body Leg onto the left side	85	80
of the Upper Body Axle (71).	85	80
of the Upper Body Axle (71).
Attach the Left Upper Body Leg (24) to the Upper
Body Axle (71) with an M8 x 19mm Button	24
Screw (85) and an M8 x 23mm x 2mm Washer	24
Screw (85) and an M8 x 23mm x 2mm Washer
(96).
Repeat this step for the Right Upper Body
Leg (72).
	7

to damage the Upper Wire Harness (65).