7. Attach the Left Upper Body Arm (22) to the Left | 7 |
|
Upper Body Leg (24) with three M8 x 14mm |
| |
| 23 | |
Button Screws (84) and three M8 Split |
| |
|
| |
Washers (97). |
|
|
Attach the Right Upper Body Arm (23) in the |
|
|
same way. |
| 22 |
|
| |
|
| 97 |
|
| 84 |
|
| 97 |
|
| 24 |
8. Hold the Left Rear Upper Body Cover (26) and | 8 |
|
the Left Front Upper Body Cover (27) around |
| |
|
| |
the Left Upper Body Leg (24). Attach the Upper |
|
|
Body Covers with five M4 x 16mm Round Head |
|
|
Screws (78). |
| 29 |
|
| |
Attach the Right Rear Upper Body Cover (28) |
| 78 |
78 |
| |
and the Right Front Upper Body Cover (29) | 28 | |
in the same way. |
| |
|
| |
|
| 27 |
|
| 26 |
|
| 24 |
|
| 78 |
9. The Console (11) can be operated with four 1.5V | 9 |
|
“D” batteries (not included); alkaline batteries are |
| |
|
| |
recommended. Remove the battery cover and |
|
|
insert four batteries into the Console. Make sure |
|
|
that the batteries are oriented as shown at the |
|
|
right. Then, reattach the battery cover. |
| 11 |
The Console (11) can also be operated with a |
|
|
regulated |
|
|
included). To purchase a power supply, call |
|
|
the |
|
|
cover of this manual. To avoid damaging the |
| Batteries |
console, use only a |
| |
|
| |
power supply. Plug one end of the power sup- |
| Battery |
ply into the jack on the console; plug the other |
| Cover |
end into an outlet installed in accordance with |
|
|
all local codes and ordinances. |
|
|
| 8 |
|