10.While another person holds the Console (11) near the Upright (10), connect the console wire harness to the Upper Wire Harness (65).
Attach the Console (11) to the Upright (10) with four M4 x 16mm Round Head Screws (78).
Avoid pinching the wire harnesses during this step.
11.Orient a Link Arm (30) as shown. Attach the Left Pedal (34) to the Link Arm with three
M8 x 45mm Button Screws (90), three M8 Split Washers (97), and three M8 x 23mm x 2mm Washers (96).
Attach a Pedal Arm Cover (39) to the Link Arm (30) with an M4 x 16mm Round Head Screw (78).
Repeat this step for the Right Pedal (not shown) and the other Link Arm (not shown).
10
11
Console Wire
Harness
10
65
78 
Avoid pinching the
wire harnesses during this step
11
34
78
39
96 
97
96 | 30 |
97 |
|
90
9