NordicTrack NTEL7506.1 user manual Avoid pinching, Wire Harnesses 64, During this step

2. Attach the Left and Right Frame Covers (36, 37)	2
around the Frame (1) with four M4 x 16mm
		37
Round Head Screws (78).
			78
			1
	78	36
3. With the help of another person, carefully tip	3
the elliptical exerciser onto its side. Attach the
Center Foot (40) to the Frame (1) with two
M4 x 16mm Round Head Screws (78). Then,	1
return the elliptical exerciser to the upright posi-
tion.
Orient the Rear Stabilizer (3) as shown. While
another person lifts the Folding Frame (2),
attach the Rear Stabilizer to the Folding Frame			2
with two M10 x 80mm Button Screws (93) and
two M10 Split Washers (99).		40
	78			99
		3	99	93
4. While another person holds the Upright (10)	4
near the Frame (1), connect the Upper Wire
Harness (65) to the Lower Wire Harness (64).		Avoid pinching the
Then, insert the Upright (10) into the Frame (1).		Wire Harnesses (64, 65)
		during this step
Attach the Upright with four M8 x 19mm Button
Screws (85) and four M8 Split Washers (97). Do
not tighten the Button Screws yet.
Avoid pinching the Wire Harnesses (64, 65)		10
during this step.
		97
		85
	65
	64
	97	97
	85	1
		97
	6