6.Attach the Handlebar (39) to the Upright (2) with four M6 x 30mm Button Screws (37).
7.While another person holds the Console (4) near the Handlebar (39), connect the console wire harness to the Upper Wire Harness (42). Next, connect the pulse wire on the Console to the Pulse Wire (51) in the Handlebar. Note: The remaining wire (not shown) on the Console is used during the manufacturing process; disregard this wire.
Insert the excess wiring downward into the Upright (2). Attach the Console (4) to the Handlebar (39) and the Upright with four M4 x 16mm Round Head
Screws (80). Be careful to avoid pinching the
Wires (42, 51).
8.Slide the Bottom Handlebar Cover (18) into the slots in the bottom of the Console (4). Attach the Bottom Handlebar Cover to the Handlebar (39) and the Top Handlebar Cover (84) with two M4 x 16mm Round Head Screws (80) and one M4 x 12mm Screw (25).
6 |
|
|
|
|
|
2 |
|
|
|
| 37 |
|
|
|
|
| |
|
| 39 |
| 37 | |
7 |
|
|
| ||
Console Wire |
|
| |||
|
|
| |||
80 | Harness |
|
|
| |
42 |
|
|
|
| |
80 |
|
|
|
|
|
2 | 39 | 51 | Pulse | 4 | |
|
| ||||
|
| Wire |
| ||
|
|
| Avoid pinching | ||
|
|
| the Wires (42, 51) | ||
|
|
| during this step. | ||
8 | 84 |
|
|
|
|
| 4 |
|
|
|
|
|
|
|
| 39 |
|
|
|
|
| Slots |
|
|
|
|
| 18 |
|
|
|
| 80 | 25 80 |
|
6