ParaBody GS4 manual X 1-3/4 8 X 3-3/4

FIGURE 21
3/8 X 1-3/4” 11	7
	35
	19
	6 3/8 X 3-3/4”
	35
	24
AN
	19
	C

STEP 21:

•Route the LOW CABLE (AN) around one 3-1/2” PULLEY (35) and assemble the PULLEY to the PULLEY BRACKET (Z) using one 3/8 X 1-3/4” BOLT (11) and one 3/8” LOCK NUT (19) as shown in FIGURE 21.

•Route the LOW CABLE (AN) throught the BASE PLATES (C) and assemble one 3-1/2” PULLEY (35) to the BASE PLATES (C) using one 3/8 X 3-3/4” BOLT (6), two 15/16” SPACERS (24) and one 3/8” LOCK NUT (19). See FIGURE 21.

22